|
|
Joined:
February 2023
Posts: 4
Location: Brisbane Australia | Gooday from down under. I have a Model 1755 '93 vintage. Had it since new. The FET3 preamp seems to have died. Is it possible to get them repaired, or if not is there an after-market preamp that will slot in. Mine has the separate 9V battery box adjacent to the FET3. I can see the OP24 looks like it would fit but can't find either of them for sale. Any feedback appreciated. |
|
| |
|
Joined:
December 2004
Posts: 566
Location: Denmark | Hi and welcome. It is not just a broken battery lead?
Here is an old thread discussing some differences but it does not explain if the OP24 fits as direct FET3 replacement. The FET3 seems also rather basic - meaning that it probably is easier to troubleshoot/repair for someone with basic knowledge of analog electronics.
http://ovationfanclub.com/megabbs/forums/thread-view.asp?tid=8313
Edited by tpa 2023-02-18 1:30 PM
|
|
| |
|
Joined:
February 2023
Posts: 4
Location: Brisbane Australia | thanks for the feedback. As an ex Australian Navy electronics tech I'll have a crack at it.. |
|
| |
|
Joined:
December 2004
Posts: 566
Location: Denmark | Then you probably may find some interest in this: http://www.ovationtribute.com/Ovation%20Schematics/Ovation_FET-3_Pr...
The diagram is availble from ovationtribute.com is also http://www.ovationtribute.com/Schematics.html There is also a mechanics parts list where seemingly many mechanical parts between FET3 and OP24 were common so chances are that the OP24 may fit.
BUT - BUT - BUT !! The OP24 also came as OP24+ which has different geometry. See them here: http://www.ovationtribute.com/Pr%E9-amplis/Ovation%20Preamps.html
- Share your findings and doings for the joy and benefit of us all, please :-)
Edited by tpa 2023-02-19 3:23 PM
|
|
| |
|
Joined:
May 2006
Posts: 4226
Location: Steeler Nation, Hudson Valley Contingent | Or you could do it the hard way, like I did. Replacing a FET-3 in my 1755 Custom Balladeer (On second thought ... Don't do it the way I did. There's almost always a better way do do things than the ways I pick.  ) |
|
| |
FET3 PREAMP ON 12 STRING MODEL 1755
