The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: "Jazz... isn't that just a series of mistakes disguised as musical composition?” - David St. Hubbins of Spinal Tap


Adamas slothead tuner improvement
Author: DetlefMichel (Show all albums)

Slothead tuners sometimes work not smooth enough, I added ball bearings
Show Newest Photos First | Show Oldest Photos First10 Photos - Page : [1]


Completed. Works perfectly.


Looks nice, nearly invisible.


On the first attempt I forgot to fill the drilling hole in order to give the drill a center but fortunaltely it worked well.


The first drilling hole gave me the courage to try the rest.


Yoe need a slide bushing because the dril will "dance" in the hole without it. I later used another one which was much longer.


The first attempt for a slide bushing. I made at least 4 different ones but they all did not work well. I must build a better one before I go to work on my 12strings..


The inside 6 and outside 10 mm ball bearings fit exactly the axles of the Schaller machines.


It takes some courage to work with this drill on the guitar if you have to work free-hand.


These ball bearings are surprisingly cheap and very effective.


I use different tunings very often and this construction did not work properly. I remembered to have an easy-tuning classic guitar with Rubner machines and they are equipped with ball bearings!!
  
Show Newest Photos First | Show Oldest Photos First10 Photos - Page : [1]

Return to viewing all photo albums



This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclub™ Copyright (c) 2001
free counters
(Delete all cookies set by this site)