|
|
Joined:
November 2003
Posts: 11039
Location: Earth·SolarSystem·LocalInterstellarCloud·Local Bub | I posted this on an older thread but it is a slightly different subject---
I was thinking about Cliff's suggestion about fastening extra strap buttons to the walls for strap storage....
I have problems with my preferred stap fitting in my case, so I usually carry it elsewhere.
Then a thought hatched...what about strategically fastening those leftover stap bottons to the outside of the case and carry the stap there? Could even become useful to sling the case over the shoulder.
Has anyone ever tried this??? Any suggestions?
(Alteration to my case is not an issue, as it is old and battered, but still functions well) |
|
| |
|
Joined:
April 2004
Posts: 13303
Location: Latitude 39.56819, Longitude -105.080066 | Actually, I kind of like that idea. My main thought would be whether or not the case itself would withstand the pulling at a specific pressure point. Maybe reinforced somehow.....or you could fix it to where it looped around the case as an additional safty net. |
|
| |
|
Joined:
November 2003
Posts: 11039
Location: Earth·SolarSystem·LocalInterstellarCloud·Local Bub | I think I'm going to give it a shot. This is the brown OHSC with the black band where handle and clasps are fastened. I'm going to cut two metal plates, attach the stap buttons to the plates, then with two rivets each, attach the plates to the banded section.
One's going to go at the headstock end, top back corner, but not so far toward the spine (hinge side) as to effect the case setting on its feet. Same with the other that will go about 2inches to the right of the lower bout clasp.
Seems like placing it diagonally across the top will be just the right length to get the strap from flopping too much yet allow for use a shoulder sling...and attach right to the guitar without re-adjusting. |
|
| |
|
Joined:
April 2004
Posts: 13303
Location: Latitude 39.56819, Longitude -105.080066 | How about ongoing pics of the project...before and after? |
|
| |
|
Joined:
November 2003
Posts: 11039
Location: Earth·SolarSystem·LocalInterstellarCloud·Local Bub | Deal |
|
| |
|
Joined:
May 2002
Posts: 1445
Location: Nova Scotia, Canada | That is and interesting idea...looking forward to the pics.
Wayne |
|
| |
|
Joined:
November 2003
Posts: 11039
Location: Earth·SolarSystem·LocalInterstellarCloud·Local Bub | COMPLETE SUCCESS!!!
Works friggin' great. Holds the strap nicely AND functions as a shoulder strap!
If You want to see the the Straplok Case Projet click here:
Straplock Project
Came out really well and is solid as a rock. The straplok will hold the the wieght of guitar in the case just fine. |
|
| |
|
Joined:
April 2004
Posts: 13303
Location: Latitude 39.56819, Longitude -105.080066 | Just saw the pics....very pro looking job. Well done! |
|
| |
Different use for Staploks???
