|
|
Joined:
November 2003
Posts: 231
| Can anyone tell me the correct size Allen wrench that I need to fit the internal neck adjustment nut on my 1985 Legend? I know that I had one, but just can't find one that fits now. Thanks
Mike |
|
| |
|
Joined:
March 2004
Posts: 1388
Location: Paris/France | Hello Roundback,
Please look at the pages #22/23/24/25 of this manual:
ACOUSTIC ONWER\'S MANUAL
It's written a "1/4" hex nut driver".
I hope it can help you.
Jérôme :) |
|
| |
|
Joined:
November 2003
Posts: 231
| I have the same owner's manual, but the 1/4" hex driver is for the tension rod adjuster at the peg head. My guitar has the Kaman bar, referred to on page 24 under internal neck adjustment. It just says Ovation Allen adjustment wrench-Model#9834-0. Thanks
Mike |
|
| |
|
Joined:
November 2002
Posts: 3611
Location: Pacific Northwest Inland Empire | Mike,
I had the same issue. I finally found the right-size Allen wrench for my K-bar nut- 3/16", according to my micrometer.
Cheers,
Chris |
|
| |
|
Joined:
November 2003
Posts: 231
| Chris,
I have located a 3/16" Allen wrench,so I will give that a try. Thanks for the info.
Mike |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | If that's the right wrench paint it red so next time you'll remember it. |
|
| |
|
Joined:
November 2003
Posts: 231
| The 3/16" Allen wrench is correct, and it looks great in red.
Mike |
|
| |
|
Joined:
November 2002
Posts: 3611
Location: Pacific Northwest Inland Empire | Glad to be of service. I put mine in its own vinyl pouch, clearly marked "K-BAR". Color memory is not my forte. |
|
| |
Neck Adjustment Wrench
