|
|
Joined:
January 2024
Posts: 3
| HELP, I have a Adam's 1597 ,my pride and joy but sadly my preamp and tuner have stopped working.i have
Searched the Internet and guitar technicians . No one can offer a replacement or suggestion to get this repaired.
Please advise. |
|
| |
|
Joined:
December 2001
Posts: 7222
Location: The Great Pacific Northwest | Welcome,
I've upgraded you to full member and moved this post into this general posting area where more people have access to answer you. I'm sure someone has a working pre-amp for you. I hope so anyway, and again, Welcome !!
|
|
| |
|
Joined:
January 2024
Posts: 3
| Hank you. |
|
| |
|
Joined:
December 2004
Posts: 566
Location: Denmark | As some models came with different preamps and most preamps were used by several models I propose you mention which model preamp you are looking for (It could be an Optima).
Take a look: http://www.ovationtribute.com/Pr%E9-amplis/Ovation%20Preamps.html
Edited by tpa 2024-01-31 4:35 PM
|
|
| |
|
Joined:
October 2005
Posts: 4044
Location: Utah | The first thing is to determine exactly where the fault is. It could be the battery power (wiring, connector), the output jack (a common failure), the saddle, the wiring inside the body, or the preamp itself.
My Dusty Guitar might have the exact replacement preamp if that is the problem. It might also be possible to repair the preamp. But first I would carefully diagnose the issue before throwing money at a replacement preamp. |
|
| |
|
Joined:
January 2024
Posts: 3
| Hi all , thanks for answering. The tuner side is not working correctly. It is the optima 2. When you try to tune the red arrows flash but the green note light stays on the # symbol. If I plug into the jack the preamp side works I can adjust tone and volume notch works.
Edited by Bigjohnw0 2024-02-01 3:00 AM
|
|
| |
|
Joined:
October 2005
Posts: 4044
Location: Utah | Try mydustyguitar.com or the Ren-Ovation Nation group on Facebook. |
|
| |
|
Joined:
December 2004
Posts: 566
Location: Denmark | Diagrams: http://www.ovationtribute.com/Ovation%20Schematics/Ovation_Optima_P... The tuner is on a separate pcb if everything else works it could be a connector issue. |
|
| |
Adams 1597
