The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: "Got time to breathe, got time for music." --Briscoe Darling.



Jump to page : 1
Now viewing page 1 [25 messages per page]
Breadwinner Circuit Board

View previous thread :: View next thread
   Members Forums -> Ovation Electric GuitarsMessage format
 
dj_doughy
Posted 2020-12-22 8:05 AM (#554509)
Subject: Breadwinner Circuit Board


Joined:
December 2020
Posts: 4

Hey everyone! This is a forward/repost of my question/request I posted in the Welcome Forum.

I got my Ovation Breadwinner back when I was 12 from my cousin. Batteries corroded, it was in a state. Local music shop got it cleaned and back up and running. It has been an OK guitar for a time, but bit the dust a few years ago. A couple years ago decided I would take it apart and see if I could track down it’s problems. The pickups were shot/decaying and the circuit board had a few traces broken, lifted, and/or corroded (most likely because of the batteries from years before).







With a little know how from my friend and I, we are going to try and make a custom printed circuit board using its current layouts and schematics we found. It will require me to move the components over, but the traces will be newer and hopefully restore the sound of the Breadwinner!

Has anyone attempted this at all?
If not, would anyone else be interested in purchasing a replacement board for their guitar? (it’s cheaper if we buy the boards in bulk!)

Side question, what have people used for replacement pickups that can mount to the Y bracket? I tried contacting Seymour Duncan about a custom Y bracket spun pickup. No response, been over a year.

Looking forward to any responses!

Edited by dj_doughy 2020-12-22 8:07 AM
Top of the page Bottom of the page
MWoody
Posted 2020-12-22 9:53 AM (#554510 - in reply to #554509)
Subject: Re: Breadwinner Circuit Board



Joined:
December 2003
Posts: 13987

Location: Upper Left USA

http://www.ovationfanclub.com/megabbs/photos/show-album.asp?albumid=1130&photoid=3248

 

I have manufactured a Y shape adapter to mount different mini HB pickups to Ovations.



Edited by MWoody 2020-12-22 9:54 AM
Top of the page Bottom of the page
dj_doughy
Posted 2020-12-22 12:50 PM (#554514 - in reply to #554510)
Subject: Re: Breadwinner Circuit Board


Joined:
December 2020
Posts: 4

MWoody - 2020-12-22 9:53 AM

http://www.ovationfanclub.com/megabbs/photos/show-album.asp?albumid=1130&photoid=3248

 

I have manufactured a Y shape adapter to mount different mini HB pickups to Ovations.



Nice! Is that 3D printed? Do you have the STL somewhere?
Top of the page Bottom of the page
numbfingers
Posted 2020-12-22 11:30 PM (#554528 - in reply to #554514)
Subject: Re: Breadwinner Circuit Board


Joined:
January 2006
Posts: 1118

Location: NW Washington State
I think MWoody would likely make it out of wood. But I can't see any of the pictures in thread.

Here's a thread with links to schematics drawn by OFC member BruDev: http://www.ovationfanclub.com/megabbs/forums/thread-view.asp?tid=32...

I'm not sure that there's a market for an exact replacement board. There are several unique components on the board that can go bad- it would be a lot of work to move everything only to find it's still not working.

I'd think about cleaning up your existing board and repairing the traces with a conductive pen like this one: https://www.amazon.com/CircuitWriter-Conductive-Ink-silver-based-4g/... IIRC, I did this on one of Woody's preamps long ago.

To get it up and running quickly, you might look at the Artec line of active electronics. You could put one module in place of the notch filter, and another in place of the tone control. http://www.artecsound.com/pickups/electronics/index.html

-Steve W.

Top of the page Bottom of the page
dj_doughy
Posted 2020-12-23 12:03 PM (#554531 - in reply to #554528)
Subject: Re: Breadwinner Circuit Board


Joined:
December 2020
Posts: 4

numbfingers - 2020-12-22 11:30 PM

I think MWoody would likely make it out of wood. But I can't see any of the pictures in thread.

Here's a thread with links to schematics drawn by OFC member BruDev: http://www.ovationfanclub.com/megabbs/forums/thread-view.asp?tid=32...

I'm not sure that there's a market for an exact replacement board. There are several unique components on the board that can go bad- it would be a lot of work to move everything only to find it's still not working.

I'd think about cleaning up your existing board and repairing the traces with a conductive pen like this one: https://www.amazon.com/CircuitWriter-Conductive-Ink-silver-based-4g/... IIRC, I did this on one of Woody's preamps long ago.

To get it up and running quickly, you might look at the Artec line of active electronics. You could put one module in place of the notch filter, and another in place of the tone control. http://www.artecsound.com/pickups/electronics/index.html

-Steve W.



Thanks for the great info! Didn't think there would be, but it would be fun nonetheless to design and have one printed. I thought that board was used in many variations of the solid body electrics of that era. My 72 Breadwinner isn't in mint condition by any means, and I think would be a candidate for some simple "sleeper" mods. Might add a kill-pot in it too. I would document everything I do too and post it if people were interested. Might 3D print that pickup adapter as well, or print and process a fancy scratch plate.

Edited by dj_doughy 2020-12-23 12:05 PM
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclub™ Copyright (c) 2001
free counters
(Delete all cookies set by this site)