The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: "There are more love songs than anything else. If songs could make you do something we'd all love one another." -Frank Zappa



Jump to page : 1
Now viewing page 1 [25 messages per page]
Fret burrs question

View previous thread :: View next thread
   Members Forums -> About my guitar...Message format
 
kentrookie
Posted 2017-06-08 10:27 PM (#535457)
Subject: Fret burrs question


Joined:
December 2008
Posts: 248

Location: Seattle

Have burrs on a couple frets occasionally catching fingers. Looking for suggestions on a fix. Not a humdity issue but a fret finish issue. Just file edges? How to protect the binding and fret board when doing the filing?

Top of the page Bottom of the page
Old Man Arthur
Posted 2017-06-09 4:06 AM (#535459 - in reply to #535457)
Subject: Re: Fret burrs question



Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR
If it is really not humidity and just the sharp ends hanging out a bit...
You need a "Fret End File".
Search for that. Like this one
Some are triangular. Some a thin and flat.
But the all have a rounded edge to keep you from cutting into the fingerboard or binding.

As to what to do... Watch this video all the way through. Especially after 2:00 to the end.
HERE Pick and choose what you need.
Personally, I only had to do this once on a Parker P44 (now long gone).
I did not tape the fingerboard edges. And neither did the guy in this video.
But he was doing all kinds of other stuff.
If you are very careful you may not need to tape the binding.
But if you have some blue painters' tape lying around, I would use it, just to be safe.

I hope that helps.
Top of the page Bottom of the page
alpep
Posted 2017-06-10 8:47 PM (#535484 - in reply to #535457)
Subject: Re: Fret burrs question


Joined:
December 2001
Posts: 10581

Location: NJ
take it to a luthier for a level and dress.
Top of the page Bottom of the page
leonardmccoy
Posted 2017-06-11 12:06 PM (#535488 - in reply to #535457)
Subject: Re: Fret burrs question



Joined:
December 2015
Posts: 287

Location: Katmandu
Same recommendation here, take it to a luthier.

https://www.youtube.com/watch?v=sO_dNfbRnvk
Top of the page Bottom of the page
kentrookie
Posted 2017-06-26 11:30 PM (#535640 - in reply to #535488)
Subject: Re: Fret burrs question


Joined:
December 2008
Posts: 248

Location: Seattle
Work done, had very good luthier do the "needful" at A# music in Renton WA. The guitar plays great and is now in my "Ovation Rotation" play schedule

Edited by kentrookie 2017-06-26 11:31 PM
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclubâ„¢ Copyright (c) 2001
free counters
(Delete all cookies set by this site)