The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: “Music is a moral law. It gives soul to the universe, wings to the mind, flight to the imagination, and charm and gaiety to life and to everything.” -Plato



Jump to page : 1
Now viewing page 1 [25 messages per page]
NEEDED preamp for 1615-4 pacemaker Single shaft

View previous thread :: View next thread
   The Ovation Fan Club -> For SaleMessage format
 
murph
Posted 2014-12-03 5:25 PM (#501460)
Subject: NEEDED preamp for 1615-4 pacemaker Single shaft


Joined:
September 2007
Posts: 108

Pretty desperate for a preamp/battery box and input jack for my 1615-4 Pacemaker. The saddle transducer that plugs into the preamp is fine, don't need that. This is the older single shaft Volume only model, from a 1980's Pacemaker. Anyone have an old project guitar, or see anything being parted out on E-Bay or Craigslist. PLease let me know. I'm almost ready to pick-up a used guitar for a couple hundred, but shipping to Canada for a guitar just ain't worth it.
I know you will do your best, thanks.

Edited by murph 2014-12-03 5:26 PM
Top of the page Bottom of the page
Patch
Posted 2014-12-03 8:13 PM (#501466 - in reply to #501460)
Subject: RE: NEEDED preamp for 1615-4 pacemaker Single shaft



Joined:
May 2006
Posts: 4226

Location: Steeler Nation, Hudson Valley Contingent

I'm not positive, but I might still have this in my parts drawer. Will that help? I don't even remember what it came out of to be honest.

Top of the page Bottom of the page
murph
Posted 2014-12-03 8:57 PM (#501467 - in reply to #501460)
Subject: RE: NEEDED preamp for 1615-4 pacemaker Single shaft


Joined:
September 2007
Posts: 108

That looks like the Volume /tone unit....BUT , My thinking is if I shut the tone down to 0 this may be the same sound. It's worth a try. I'm happy to pay whatever you think is fair, looks like I'll have to solder on the 3rd ground wire...but I'm getting pretty good with the soldering iron, lots of practice trying to fix my unit. My email is murrayandrew1@rogers.com to get shipping info and payment etc . Thanks, Murray..... Hey I didn't realize it was you Patch. God bless you friend. This was the Black Arizona guitar that got crushed in shipping and factory restored.

Edited by murph 2014-12-03 8:59 PM
Top of the page Bottom of the page
Patch
Posted 2014-12-04 11:43 AM (#501480 - in reply to #501460)
Subject: RE: NEEDED preamp for 1615-4 pacemaker Single shaft



Joined:
May 2006
Posts: 4226

Location: Steeler Nation, Hudson Valley Contingent

Well Hiya Murray!

I remember that guitar! After this much time, it probably sounds even better!

Top of the page Bottom of the page
murph
Posted 2014-12-19 5:15 PM (#503939 - in reply to #501460)
Subject: Re: NEEDED preamp for 1615-4 pacemaker Single shaft


Joined:
September 2007
Posts: 108

Patch, being the true to his word type of guy, helped me with the Volume/tone preamp and it installed nicely, and although sounding good, just isn't the same. I know you know..( everyone here) what its like to be chasing that sound, So the quest continues. If ANYONE has a single shaft volume only pre-amp for a pacemaker that they want to part with, well you'd really help a guy out! I'll pay fair value, and be eternally grateful. These were in the old 6 string Balladeers too, but in the Glen Campbell I think they added Tone Control. So I guess what I have is a factory-refurbished Glen Campbell 12'er, (just in case anyone is in the market for one, and I'll Pick-up something else.)
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclub™ Copyright (c) 2001
free counters
(Delete all cookies set by this site)