The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: "I've always felt that blues, rock 'n' roll and country are just about a beat apart."-Waylon Jennings



Jump to page : 1
Now viewing page 1 [25 messages per page]
ADII Head Problem

View previous thread :: View next thread
   Member Communities -> Bottom Feeding Luthiery GuildMessage format
 
BanjoJ
Posted 2013-07-25 6:35 AM (#473579)
Subject: ADII Head Problem



Joined:
September 2012
Posts: 809

Location: Thredbo, NSW, Australia
I have a problem with the top-coat lifting on the head of my 2006 ADII.

Hopefully the photo will show you, but the top-coat is lifting from around the nuts on all of the tuners.

So I'm wondering what to do to fix it.

First thoughts are to try superglue around one tuner and sand then buff it, in the same way as with the finish coat on the soundboard that people have done.

I'm open to suggestions.



Edited by BanjoJ 2013-07-25 6:37 AM




(ADII-1.JPG)



Attachments
----------------
Attachments ADII-1.JPG (24KB - 0 downloads)
Top of the page Bottom of the page
seesquare
Posted 2013-07-25 7:47 AM (#473581 - in reply to #473579)
Subject: Re: ADII Head Problem


Joined:
November 2002
Posts: 3598

Location: Pacific Northwest Inland Empire
Probably slow & laborious, but cyanoacrylate may be the best method. It will "wick" under the edges of the topcoat, where application of 2-part polyester may not. It just may take several coatings for that large boo-boo you have there.
Best of luck!
Top of the page Bottom of the page
MWoody
Posted 2013-07-25 11:39 AM (#473582 - in reply to #473579)
Subject: Re: ADII Head Problem



Joined:
December 2003
Posts: 13983

Location: Upper Left USA
Try the Cyano and if it fails sand off the entire face, place a new logo and spray.

Since the Neck is removable (yes?) I'd ship it to Mother!
Top of the page Bottom of the page
BanjoJ
Posted 2013-07-26 5:59 PM (#473608 - in reply to #473582)
Subject: Re: ADII Head Problem



Joined:
September 2012
Posts: 809

Location: Thredbo, NSW, Australia
Thanks guys. I'll try the cyanoacrylate.

I've fixed some dings on my Folklore with cyano, which have come up quite well.


Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclubâ„¢ Copyright (c) 2001
free counters
(Delete all cookies set by this site)