The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: "Jazz... isn't that just a series of mistakes disguised as musical composition?” - David St. Hubbins of Spinal Tap



Jump to page : 1
Now viewing page 1 [25 messages per page]
1866 Legend 12 string - need some advice please

View previous thread :: View next thread
   Members Forums -> General PostingMessage format
 
bowl playin boy
Posted 2013-06-23 11:34 AM (#472785)
Subject: 1866 Legend 12 string - need some advice please


Joined:
July 2005
Posts: 92

Location: Northeast Ohio		Hello everyone, i have a 1991 1866 Legend 12 string that i bought off ebay. It is in very nice condition but i have a small dilemma and was hoping that someone in the club may have some advice to give me or maybe have run up against this before. The truss rod was tightened by the previous owner i'm guessing to try to lower the action. I want to return it to the proper relief.....i used my Ovation truss rod tool and of course the head of the rod is stripped. I tried an E Z out screw extractor...but no luck. Does anyone have any advice or secret tool that they have come up with to fix this? Also there is a bolt right under the truss rod - does this model have a bolt on neck if i loosen it? Thank you very much in advance for looking at this and for any help......James
Top of the page Bottom of the page
Old Man Arthur
Posted 2013-06-23 12:55 PM (#472786 - in reply to #472785)
Subject: Re: 1866 Legend 12 string - need some advice please



Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR		I am guessing that a 1866 is an SSB... That would be why there would One Bolt.
Yes that is a Bolt-On neck.
And no, you do not want to loosen it.
If there is a space between the neck heel and the bowl, you would tighten that bolt.

I don't have a solution for the truss-rod problem...
But it is still early, someone with experience should be along.
Top of the page Bottom of the page
Glen C.
Posted 2013-06-24 10:18 AM (#472811 - in reply to #472785)
Subject: Re: 1866 Legend 12 string - need some advice please



Joined:
November 2009
Posts: 152

Location: Corpus Christi, TX		The 1866 has a bolt on neck but the fretboard exdtension is glued to the top of the guitar so the neck is not really removable unless you unglue and reglue the fretboard extension. Bought one from a pawn shop and the fret extension was coming unglued as well as some neck binding pieces missing. Sent it to the factory for an overhaul and as usual John and the gang did an excellent job.

Sorry but I don't have a truss rod solution for you either

Edited by Glen C. 2013-06-24 10:19 AM
Top of the page Bottom of the page
MWoody
Posted 2013-06-24 12:28 PM (#472813 - in reply to #472785)
Subject: Re: 1866 Legend 12 string - need some advice please



Joined:
December 2003
Posts: 13987

Location: Upper Left USA

go to www.stewmac.com and look at their Truss Rod rescue kit or the parts there of. It may not matter with this configuration of truss rod though.



Edited by MWoody 2013-06-24 12:28 PM
Top of the page Bottom of the page
bowl playin boy
Posted 2013-06-24 8:30 PM (#472831 - in reply to #472785)
Subject: Re: 1866 Legend 12 string - need some advice please


Joined:
July 2005
Posts: 92

Location: Northeast Ohio		Thank you for the replies. I am going to keep researching it.... can't really send it to the factory right now. thanks again
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclub™ Copyright (c) 2001
free counters
(Delete all cookies set by this site)