|
|
Joined:
April 2011
Posts: 21
Location: Ironton, Ohio | I need some advice, I have a 92 collectors series that needs a fret job but is also getting some slight bowl separation nothing bad but its got me concerned, any ideas? should I send it back to the mothership? and if so who do I contact? thanks! |
|
| |
|
Joined:
September 2006
Posts: 10777
Location: Keepin' It Weird in Portland, OR | We all say the you want to contact John Budny and Kim Keller.
But to start you should just converse with whomever you get.
Follow the instructions here...
http://www.ovationguitars.com/support/customer_service
I just called the USA Ovation 7575 number to make sure that it works...
It does. (I just called to make sure that those numbers are current)
|
|
| |
|
Joined:
October 2005
Posts: 4044
Location: Utah | Can you describe the bowl separation, or better yet post some pictures of it? |
|
| |
|
Joined:
April 2011
Posts: 21
Location: Ironton, Ohio | I dont I have anything that would take a closeup of it so you could see it but I'll try and describe it for ya. its about 10" long and runs just above the electonics, a little bit larger just around the electronics and feathers out to each side till you cant see it anymore. also just slightly see it around the end strap button. also thanks arthur for the info that helps alot!
Edited by timiko 2013-06-23 6:43 PM
|
|
| |
1992 collectors series problems!
