|
|
Joined:
May 2002
Posts: 1026
Location: Back in the Valley of the Sun Mesa Az. | Hey guys...quick question.
I regularly let students, and recently an aquantaince play my O's. It seems some people are pretty heavy handed with a pick. Anyways, I now have some pretty heavy pick scratching into the rosette and faceboard of my Legend and my Anniversary Model. The Legend I expected as kids pound on it pretty good, but I am a little bummed about the Anniversary Model that I pretty much baby.
Anyways, are these scars absolutely for life, or is there something that can be done...I've heard of guys wet sanding faceboards? I tried rubbing in a little Formby's Lemmon Oil, and polish, but to little effect. The finish has been hit pretty hard.
Appreciate any ideas!
Norse(only stop by when I need something)man1 |
|
| |
|
Joined:
November 2003
Posts: 11039
Location: Earth·SolarSystem·LocalInterstellarCloud·Local Bub | Arm&Hammer toothpaste (though I suspect most brands will do... paste! not gel!) and a soft wet cloth. Be patient. Move in circles. |
|
| |
|
Joined:
May 2002
Posts: 1026
Location: Back in the Valley of the Sun Mesa Az. | Really?! Wow, and that's even something I..the Norseman...can actually handle doing!
Norse(as long as I spit my gum out before I start)man1 |
|
| |
|
Joined:
May 2002
Posts: 1026
Location: Back in the Valley of the Sun Mesa Az. | Now I am confused...I just don't understand why I need to move in a circle while doing this...do I take the guitar with me? Or, do I complete each circle before rubbing the scratches again?
Norse(confused easily)man1
seriously though...thanks for the tip! |
|
| |
|
Joined:
March 2005
Posts: 12761
Location: Boise, Idaho | Use a swivel chair or stool, but I recommend a low one, so it doesn't hurt as badly when you get dizzy and fall off.
I suspect Jeff's Arm & Hammer recommendation may be a cheap substitute for guitar or car scratch remover. A&H may have some baking soda, which acts as a finishing compound. |
|
| |
|
Joined:
September 2006
Posts: 10777
Location: Keepin' It Weird in Portland, OR | I'm just thinking of how I spent good money on a jar of stuff that Looks like Crest outta the tube.
And now you are telling me that I coulda went to the Dollar Store and got a tube of toothpaste! :confused: |
|
| |
|
Joined:
May 2008
Posts: 4996
Location: Phoenix AZ | Toothpaste also makes for a good nail hole filler in the walls |
|
| |
|
Joined:
January 2006
Posts: 5881
Location: Colorado Rocky Mountains | Say OMA, look at the bright side. You now have an emergency supply of toothpaste. |
|
| |
|
Joined:
May 2002
Posts: 1026
Location: Back in the Valley of the Sun Mesa Az. | ...that reminds me...did you know that a guy from Arkansas invented the "toothbrush"....yea, if it would've been someone from any other state, it would've been called a "teethbrush"!
Norse(sorry about that razorbacks)man1 |
|
| |
|
Joined:
May 2008
Posts: 1565
Location: Indiana | I use Crest paste on tuners as well. Just like a car wax, apply with a slightly damp cloth and let haze over. Then polish with clean dry cloth.
I don't do it often... I guess every few years. And I usually completely remove the tuners, nuts and washers. But it'll really make an older set of gold Schaller's look nice. |
|
| |
|
Joined:
December 2006
Posts: 6268
Location: Florida Central Gulf Coast | Originally posted by Gallerinski:
Toothpaste also makes for a good ... ... scratch remover for wrist watch dial faces. |
|
| |
|
Joined:
August 2002
Posts: 8307
Location: Tennessee | Here ... lemme take the scratches outta your guitar and wristwatch.
Be patient. Move in circles. After a couple of minutes, you'll never even know that they were there! :D |
|
| |
|
Joined:
June 2006
Posts: 7307
Location: South of most, North of few | Originally posted by Gallerinski:
Toothpaste also makes for a good nail hole filler in the walls We used to do that when moving from an apartment when I was in college. I told a friend about the idea, and he tried it. Got back to me a week later and said it didn't work. I found out later he was using Closeup, which is red.... :rolleyes: |
|
| |
|
Joined:
December 2008
Posts: 1456
Location: Texas | Originally posted by Jonmark Stone:
I use Crest paste on tuners as well. Just like a car wax, apply with a slightly damp cloth and let haze over. Then polish with clean dry cloth.
I don't do it often... I guess every few years. And I usually completely remove the tuners, nuts and washers. But it'll really make an older set of gold Schaller's look nice. +1 on that - Someone here (probably Jonmark) once recommended Crest toothpaste for tuners when I was trying to clean up a disgustingly filthy MEII I bought. At first, I thought it was a joke, but I tried it, and it worked amazingly well, they looked practically brand-new afterwards, and smelled great too! (Plus… it's cheap and readily available.) |
|
| |
|
Joined:
April 2006
Posts: 2491
Location: Copenhagen Denmark | So , NORSEMAN is Not Scandinavian then .. ??! .. |
|
| |
|
Joined:
June 2007
Posts: 3084
Location: Brisbane Australia | Any ideas?
Grab a coupla beaters!!
AJ :D |
|
| |
|
Joined:
May 2002
Posts: 1026
Location: Back in the Valley of the Sun Mesa Az. | yea, you betcha I am. I moved down der to da soudwest to gedaway from dat dere cold in Minneota.
Norse(UUUFDA Da weader soo much nicer down here don'tcha know)man1 |
|
| |
|
Joined:
October 2008
Posts: 639
Location: NW of Philadelphia | Norse,
If they a grooves in the wood (not scratches), smile and move on. Nothing can be done. If they are truly just scratches, Maquires X polish will take them out and make the top like a mirror. |
|
| |
|
Joined:
May 2009
Posts: 325
Location: Utica, NY | What is the worry (if any) about using auto type cleaners and polishes that contain silicone vs. instrument (and some Maguires pro products) that do not? I use a mirror glaze (#4 I believe) for stratch removal and I believe that I does not contain silicone. Finish with Stelling Glyde Cote (the best guitar polish I have ever used). |
|
| |
Pick Scratches
