|
|
Joined:
August 2003
Posts: 2246
Location: Yucaipa, California | ....my S771 has the Delrin Compensated saddle that is deforming under the strings. I have it strung with the Nashville High strings and the octave G string is burying itself in the saddle!
I want to replace the Delrin saddle with a bone or Tusq saddle.
The Mothership does not have any...only Delrin (rather odd methinks). So, before I stop at the local Music Store or GC, I thought I'd check the Hive Mind.
Anyone here have an extra blank that's not needed? I'm most happy to pay! If not, I'll stop and buy a blank (two actually because I'll probably ruin the first one)....I have a Dremel Tool somewhere that I can use....
Many Thanks! |
|
| |
|
Joined:
November 2004
Posts: 367
Location: Eaton, Indiana | If you can't find one, Steward Mcdonald carries about everything you'll need. They are on line.
scott lamperd b c (before computers) |
|
| |
|
Joined:
February 2004
Posts: 1634
Location: Warren,Pa. | Stewmac.com
You'll find something there for sure. If you don't see a saddle ready-made to fit your guitar (...and you WON'T), they'll have a blank you can work with. You need the proper thickness. Standard is either 3/32" or 1/8". Then they have "very thick" so you can sand it down.
Then you need it to be long enough.
Then you need it to be "high" enough.
I always but 2 : )
John <>{ |
|
| |
|
Joined:
August 2003
Posts: 2246
Location: Yucaipa, California | ....exactly my plan if the locals don't have blanks..... gotta find my Dremel though....
Sill haven't figured out why the Mothership uses the lousy Delrin saddles though.....
Thanks folks. |
|
| |
|
Joined:
August 2003
Posts: 2246
Location: Yucaipa, California | ...local Mom & Pop had some..... :) |
|
| |
Wanted: Bone/Tusq Saddle for S771 Balladeer
