The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )
NEW in 2026 Searches both the Ovation FanClub and Ovation Tribute websites

Random quote: "Ovation Guitars really don't get the respect they deserve!" - Alex Pepiak



Jump to page : 1
Now viewing page 1 [25 messages per page]
How to prevent bridge lift?

View previous thread :: View next thread
   Forums Archive -> The Vault: 2008Message format
 
dweezil
Posted 2008-06-16 3:08 PM (#34462)
Subject: How to prevent bridge lift?


Joined:
April 2008
Posts: 2336

Location: Brighty in Blighty
Was reading a recent forum post about a guitar that had suffered from bridge lift.

Started me wondering...

If I look closely on both my 84C and 868 it appears that there is a SLIGHT raised 'hump' on the sound board behind the bridge. So...

1. Is this natural / normal?
2. Should I worry (more than I ought to)?
3. How can one prevent it (short of detuning after each session)?
4. Bearing in mind I play in tunings (i.e. Open E) that put more tension on the neck than regular tuning am I more likely to suffer from stink foot, oops sorry I mean bridge lift?

I use 11 - 50 gauge strings so perhaps the 'damage' was done ny previous owners.
Top of the page Bottom of the page
lanaki
Posted 2008-06-16 3:14 PM (#34463 - in reply to #34462)
Subject: Re: How to prevent bridge lift?


Joined:
October 2006
Posts: 5575

Location: big island
slight hump behind the bridge is rather normal.
Top of the page Bottom of the page
2ifbyC
Posted 2008-06-16 3:49 PM (#34464 - in reply to #34462)
Subject: Re: How to prevent bridge lift?
Joined:
December 2006
Posts: 6268

Location: Florida Central Gulf Coast
Down here, you just don't use the on-board marine horn to awaken the bridge tender...
Top of the page Bottom of the page
G8r
Posted 2008-06-16 3:54 PM (#34465 - in reply to #34462)
Subject: Re: How to prevent bridge lift?


Joined:
November 2006
Posts: 3969

Originally posted by 2ifbyC:
Down here, you just don't use the on-board marine horn to awaken the bridge tender...
:D :D :D

I was gonna say "lower the mast, raise the keel & wait for low tide" but ya beat me to it...
Top of the page Bottom of the page
an4340
Posted 2008-06-16 3:56 PM (#34466 - in reply to #34462)
Subject: Re: How to prevent bridge lift?


Joined:
May 2003
Posts: 4389

Location: Capital District, NY, USA Minor Outlying Islands
A small amount of hump is normal.
Top of the page Bottom of the page
schroeder
Posted 2008-06-16 5:26 PM (#34467 - in reply to #34462)
Subject: Re: How to prevent bridge lift?


Joined:
November 2004
Posts: 4413

Which is what I keep telling my wife.
Top of the page Bottom of the page
dweezil
Posted 2008-06-16 5:46 PM (#34468 - in reply to #34462)
Subject: Re: How to prevent bridge lift?


Joined:
April 2008
Posts: 2336

Location: Brighty in Blighty
you guys...
Top of the page Bottom of the page
GlennAllenHessSr
Posted 2008-06-16 8:17 PM (#34469 - in reply to #34462)
Subject: Re: How to prevent bridge lift?
Joined:
April 2008
Posts: 498

so who decides what a small amount is? and why only a small amount?
Top of the page Bottom of the page
Paul Templeman
Posted 2008-06-16 8:27 PM (#34470 - in reply to #34462)
Subject: Re: How to prevent bridge lift?


Joined:
February 2002
Posts: 5750

Location: Scotland
more than a small amount of hump in the top means that standard adustments, such as bridge saddle height reduction will eventually, depending on neck-pitch, no longer fix a high action. Little or no top bulge generally means the guitar is over-braced and wont sound great. Too much top bulge generally indicates structural problems. Too little/too much/just right is a variable depending on the particular age, condition, geometry, storage conditions, maintainance, player perception, action and feel preference of each guitar. If the Bridge glue-seam is failing that is not normal and is a separate issue which should be fixed, even if it happens on a bridge that is bolted and glued
Top of the page Bottom of the page
GlennAllenHessSr
Posted 2008-06-16 8:37 PM (#34471 - in reply to #34462)
Subject: Re: How to prevent bridge lift?
Joined:
April 2008
Posts: 498

so there's a difference between a "good hump" and a "bad hump" ?
Top of the page Bottom of the page
Paul Templeman
Posted 2008-06-16 8:39 PM (#34472 - in reply to #34462)
Subject: Re: How to prevent bridge lift?


Joined:
February 2002
Posts: 5750

Location: Scotland
I didn't know you'd met my wife.

BTW, We're taking wood tops here. Carbon fibre tops tend to stay pretty much as they were built.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclubâ„¢ Copyright (c) 2001
free counters
(Delete all cookies set by this site)