|
|
Joined:
December 2006
Posts: 9
| I find I need to tweak the action on my Magnum 1 just a little. However, the truss rod nut takes a 1/4" hex wrench, and I'm unable to find one where I live (Finland). Everything here is mm only. If anybody on this forum has a spare tool that will do the job, please email me at mhulden2@welho.com
Thank you,
Mats Huldén |
|
| |
|
Joined:
August 2006
Posts: 2804
Location: ranson,wva | if its the same as the 70's acoustics it takes a nutdriver. i use a T-handle screwdriver that you can change the bits in. take the bit out and it fits perfect....im not sure if that type of bass takes a 1/4 allen whench of the 1/4in socket type....jason |
|
| |
|
Joined:
December 2004
Posts: 4394
Location: East Tennessee | Originally posted by Jason_S:
if its the same as the 70's acoustics it takes a nutdriver. i use a T-handle screwdriver that you can change the bits in. take the bit out and it fits perfect....im not sure if that type of bass takes a 1/4 allen whench of the 1/4in socket type....jason That works with my Country Artist and Pacemaker. |
|
| |
|
Joined:
December 2006
Posts: 9
| Jason, thanks for the tip. I was able to find a tool just like you described, and it's indeed an exact fit. Much obliged. - Mats |
|
| |
Wanted: truss rod adjustment tool
