|
|
Joined:
September 2006
Posts: 30
| Any condition working or non working.
Please let me know what you have.
Thank You in advance. |
|
| |
|
Joined:
September 2006
Posts: 30
| Hoping someone can help. |
|
| |
|
Joined:
December 2003
Posts: 13992
Location: Upper Left USA | Rolo,
Do have any parts to start with or are you looking for the the Preamp, Pups and PG?
Deacon or Preacher deluxe?
I don't have any sets right now but they show up occasionally.
Some of the more gifted Members can repair broken ones but they are rare without buying the whole guitar. |
|
| |
|
Joined:
September 2006
Posts: 30
| I do have both the pickups only and require the preamp.
It's for a Breadwinner but correct me if I'm wrong ...any solid body preamp would work.
Thank you in advance. |
|
| |
|
Joined:
January 2003
Posts: 1498
Location: San Bernardino, California | The circuit board for the Breadwinners with the side mounted output jack is different than the pickguard mounted type. Both electronically and physically. |
|
| |
|
Joined:
January 2006
Posts: 1123
Location: NW Washington State | Might be a while before you find an original preamp. This Artec tone/boost switch looks like it could be an interesting substitute. It should be possible to use it along with conventional tone/volume/pickup selector controls. It would go where the notch filter switch was. I haven't tried it, but it would be a cheap experiment. Don't know the seller either- looks like they have the full range of Artec pickups and gizmos.
-Steve W. |
|
| |
|
Joined:
June 2007
Posts: 3084
Location: Brisbane Australia | Is the output jack in the PG or body?
Humbuckers or single coils?
I got a preamp from Miles last year.
AJ |
|
| |
|
Joined:
September 2006
Posts: 30
| I do have the Pick Guard and the Jack is in it up top.
The Pickups are the originals which I believe are humbuckers.
Hopefully someone has a spare / working or not.
I currently have the pickups wired to a 2 way selector and a simple volume tone pot with terrible results and sound. Even a broken one that I could have repaired would HELP A LOT.
I am also looking for a gold neckplate since I managed to fing a gold battery cover.
Any and all help appreciated!
Thank You |
|
| |
|
Joined:
June 2007
Posts: 3084
Location: Brisbane Australia | Any pics of the pups and guitar?
I have a preamp that is not working, might consider selling it
Gold neckplate is not an easy one, you were lucky to find a gold battery cover
AJ |
|
| |
|
Joined:
August 2006
Posts: 3145
Location: Marlton, NJ | Dude!
8|301%3A1|293%3A1|294%3A50]Dude!
|
|
| |
|
Joined:
June 2007
Posts: 3084
Location: Brisbane Australia | Mike, I must be losing my touch, missed that one :rolleyes:
That's the output jack in the pickguard model preamp
AJ |
|
| |
|
Joined:
September 2006
Posts: 30
| If anyone is looking for a "Gold" Battery cover and has a Chrome set, neck and battery cover to spare I would gladly trade as well purchase the neck plate.
My gold one is - Mint
If and when this all comes together I will be looking for Tone & Volume knobs as well as one of those fancy bridges.
Thank You in advance. |
|
| |
|
Joined:
June 2007
Posts: 3084
Location: Brisbane Australia | Rolo, I'll keep it in mind.
I have a spare chrome battery cover but not a neckplate.
I have a new gold and also a chrome Schaller Ovation bridge, not sure I want to part with them at this stage.
Knobs are pretty easy to get, I'd have a couple of spares in fair cond.
AJ |
|
| |
|
Joined:
December 2006
Posts: 6268
Location: Florida Central Gulf Coast | Jim,
If you ever want to sell the gold Schaller, please LMK.  |
|
| |
Searching for Solid Body active electonics
