|
|
Joined:
August 2006
Posts: 2804
Location: ranson,wva | im shure one of the resident smartasses will have something to say....any how i picked my 1567 up friday night,the electronics are shot,the guy had it wired direct ot and it works fine but i want to have the control over the tone and volume...
now to the k-bar issue..how the hell do you adjust the action on these necks? its the first one ive owned. some advice would be great..thanks jason
ps..if any one has a stacked knob vol/tone preamp they wanna sell let me know..jason |
|
| |
|
Joined:
August 2006
Posts: 2804
Location: ranson,wva | do you need a special allen wrench?? ive got one of the long allens that kim sent me...jason |
|
| |
|
Joined:
September 2006
Posts: 10777
Location: Keepin' It Weird in Portland, OR | Yes, and depending on the model, you either reach in the sound-hole, or in the little trap door in the back. The manual, and OFC's say, turn very, very little. Like 1/8 turns.
Good Luck.
I wish I knew what size that wrench is. I mean, I got one, but if I lose it I'd like to know... |
|
| |
|
Joined:
June 2006
Posts: 7307
Location: South of most, North of few | I beleive it's a 3/16" and you can use a standard (short) allen if you reach up in there. At least on a deep bowl. |
|
| |
|
Joined:
August 2006
Posts: 2804
Location: ranson,wva | the 1567 is a ssb, only made one year. i know how to set up a standard truss rod neck but this is the first o' ive had with a kbar neck....the action is just a bit low for my playing style(heavy right hand) as im getting a slight buzz if i hit 'em a bit too hard..jason |
|
| |
|
Joined:
November 2005
Posts: 1126
Location: Omaha, NE | The good news is that they are so dead on stable, once you get it right, you'll probably never touch it again. |
|
| |
|
Joined:
February 2004
Posts: 1634
Location: Warren,Pa. | Ignore the fact that it's a K-Bar neck. All that means to you is they've replaced a lot of wood with aluminum. It's a standard trussrod. Just adjust like any other (1/8 turn at a time).
John <>{ |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | that's right. Right for bow, left for warp. |
|
| |
|
Joined:
August 2006
Posts: 2804
Location: ranson,wva | thanks john,bill,everyone else....
that answered my question..thanks..jason |
|
| |
how do you adjust a kaman bar neck?
