|
|
Joined:
June 2002
Posts: 6202
Location: Phoenix AZ | I know this question has come up before but I can't find it in the search. Can anyone tell me i) what is the size nut drive needed for an Ovation traditional style truss rod at the headstock. ii) what is the size and length needed for an adjusting wrench for the K-bar types.
Thanks, Dave |
|
| |
|
Joined:
February 2002
Posts: 5750
Location: Scotland | The guitars which adjust at the head need a 1/4inch socket wrench. I'm pretty sure the K-bar hex key is 1/4 also. |
|
| |
|
Joined:
February 2003
Posts: 398
Location: Gig Harbor, Washington | Affirmative on the 1/4's...in fact I use a multi-bit screwdriver (the type with 10 bits in the handle), and the empty shaft is 1/4", and long enough to make it down the channel under the nut (on the older headstock units). A standard 1/4" 90 allen wrench on the new...Keep It Straight...&... :cool: |
|
| |
Truss Rod Wrench
