|
|
Joined:
January 2005
Posts: 8
Location: Philadelphia, PA | I have a new Ovation 1778 T, and I need to do some minor neck adjustments.
There seems to be two places where the neck adjustment might be. There is a cover on the headstock and there is also a hex nut adjustment inside the guitar (at the heel of the neck).
Is this a double truss rod? Which adjustment point do I use? (headstock or heel?) |
|
| |
|
Joined:
November 2004
Posts: 67
Location: Los Angeles, CA | Just open up the truss rod cover on the headstock and adjust away!
I too have a 1778T and love it! I use a 3/16 size hex thingy. I think it would be the same for you too. |
|
| |
|
Joined:
January 2005
Posts: 8
Location: Philadelphia, PA | So what does the adjustment at the heel do?
Thanks for the reply! |
|
| |
|
Joined:
October 2002
Posts: 170
Location: The Shop | That is where the neck is bolted to the body. |
|
| |
|
Joined:
January 2005
Posts: 8
Location: Philadelphia, PA | Ahhh!
Good thing I joined this board and asked that question.
I've seen Ovation guitars that have adjustments inside the bowl (hence the rear access) so I wasn't sure if this was one of those double-truss-rods or whatever.
Phew... good thing I asked.
:eek: |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | you would have had a fun time with the neck coming off and the strings at tension..... |
|
| |
Ovation 1778 T Neck question
