|
|
Joined:
October 2005
Posts: 803
Location: Avondale, AZ | I saw it first. Please don't bid against me.
If I can get this I won't be getting the accoustic guitar for a while.
http://cgi.ebay.com/Ovation-Breadwinner-RareAll-Original-Early-Mode... |
|
| |
|
Joined:
September 2005
Posts: 107
Location: South Jersey | You called it, good enough for me. I'd try and backdoor it, myself. Offer him 600 or something to end early and sell to the high bidder. |
|
| |
|
Joined:
August 2005
Posts: 130
| Go for it.
It's a very nice example. |
|
| |
|
Joined:
January 2003
Posts: 1498
Location: San Bernardino, California | Tuners have been changed. |
|
| |
|
Joined:
October 2005
Posts: 803
Location: Avondale, AZ | BruDev, how do you know that the tuners aren't original? He claims it is all original. |
|
| |
|
Joined:
December 2003
Posts: 13996
Location: Upper Left USA | You can see the holes where the old set were. Originals were the black plastic (can I use that word).
I bet there's a beautiful mahogany body under all that white polane! And a sweet neck as well! |
|
| |
|
Joined:
December 2004
Posts: 2150
Location: Orlando, FL | Good Luck! I hope you get it! |
|
| |
|
Joined:
December 2004
Posts: 4394
Location: East Tennessee | Go for it. :cool: |
|
| |
|
Joined:
February 2005
Posts: 11840
Location: closely held secret | Watch it like a hawk the last few minutes. Lotsa sniping goin on lately. |
|
| |
|
Joined:
October 2005
Posts: 5331
Location: Cicero, NY | Be a bulldog, OLJ. And good luck. |
|
| |
|
Joined:
October 2005
Posts: 803
Location: Avondale, AZ | I going to have to let this one get away because of some unexpected bills. Feel free to bid. Thanks for holding off on your bids earlier. |
|
| |
|
Joined:
September 2005
Posts: 107
Location: South Jersey | Still pretty cheap with 6 hours left... |
|
| |
|
Joined:
September 2003
Posts: 9301
Location: south east Michigan | Wow....$1253.00 and there where exposed holes in the headstock were the tuners were changed. |
|
| |
|
Joined:
August 2005
Posts: 130
| !!!!!
Good omen for mine? |
|
| |
|
Joined:
September 2003
Posts: 9301
Location: south east Michigan | I hope so K. |
|
| |
|
Joined:
December 2003
Posts: 13996
Location: Upper Left USA | Patience Padwan! |
|
| |
|
Joined:
September 2005
Posts: 107
Location: South Jersey | This might be a really good time to sell one if you have one you don't play. That one was at about 450 with 6 hours left. |
|
| |
|
Joined:
August 2005
Posts: 130
| The "Deacon-Limited" sold for $976.67-it's only a matter of 40 minutes now.
I'm getting really anxious...but I am patient. :D |
|
| |
|
Joined:
August 2005
Posts: 130
| Didn't sell.
I'm relisting soon with a lowered reserve. |
|
| |
|
Joined:
December 2003
Posts: 13996
Location: Upper Left USA | And paragraphs?
Hang in there. |
|
| |
|
Joined:
September 2003
Posts: 9301
Location: south east Michigan | Just a suggestion...give it a week or two before you relist. There might be some fresh buyers out there. |
|
| |
|
Joined:
December 2004
Posts: 1673
Location: SoCal | Katana, I bought the other Limited.
I asked to talk to you because I wanted to buy yours because I did not need your neck.
The seller of the other limited confirmed that their neck is straight.
I would be glad to work something out with you if you want the neck off of the one I just bought. |
|
| |
|
Joined:
August 2005
Posts: 130
| (edit) Enough with the sob story already-I have good news.
I took the neck off just to see what was in the pocket. There looks to be a fragment of newsprint (possibly from a hiking map?) stuck in there, along with a barely legible inkstamp under the newsprint.
Anyway, the neck isn't warped. What's actually wrong is that the nut was cut badly-there's a slant to the base of the nut, causing the appearance of warpage. Also, the string spacing's off for the same reason-the spacing from slot to slot isn't equal. Finally, some of the frets are lifting out of the board, which wasn't obvious without an extremely close examination.
I'm emailing the Mothership tonight and inquiring about a re-finish, re-nut, and re-fret and the costs that come with them. I'll keep you all posted. |
|
| |
|
Joined:
December 2004
Posts: 1673
Location: SoCal | Originally posted by Katana6506 October 19, 2005 05:57 PM:
(edit) Enough with the sob story already-I have good news.
I took the neck off just to see what was in the pocket. There looks to be a fragment of newsprint (possibly from a hiking map?) stuck in there, along with a barely legible inkstamp under the newsprint.
Anyway, the neck isn't warped. What's actually wrong is that the nut was cut badly-there's a slant to the base of the nut, causing the appearance of warpage. Also, the string spacing's off for the same reason-the spacing from slot to slot isn't equal. Finally, some of the frets are lifting out of the board, which wasn't obvious without an extremely close examination.
I'm emailing the Mothership tonight and inquiring about a re-finish, re-nut, and re-fret and the costs that come with them. I'll keep you all posted. Originally posted by Katana6506 August 31, 2005 06:14 PM:
I had the guitar at the tech's tonight, and while the warp is irreparable, the intonation issue was not caused by the warp. The neck isn't sitting quite straight in the pocket, causing a slight intonation problem... Katana, Your Breadwinner Limited is a Soap Opera...
I caught your Premier Episode on August 17th.
The episodes on the OFC have been great.
My heart went out to the writer and producer of the episode that aired on the eBay Network.
Before you rewrote your (October 19, 2005 05:57 PM) post, it said you were broke and you needed the money.
Within minutes, the script was rewritten!
The leading man took the guitar apart and re-diagnosed the patient's ailments!
The irreparable warped neck is no longer warped!
The destitute leading man can now handle a re-finish, re-nut, and re-fret with the Mothership!
I love happy endings... ;) |
|
| |
|
Joined:
August 2005
Posts: 130
| Ain't it though... :D
And yes, I do have a tendency to change my mind. I just wanted to make sure that everything I had said about the guitar before was absolutely correct-hence the neck removal.
Still can't afford the work-I just want to know how much it'll cost. |
|
| |
Bread winner 4 me
