|
|
Joined:
August 2003
Posts: 4619
Location: SoCal | Does anyone have a template for the Hurricane pick guard? |
|
| |
|
Joined:
December 2014
Posts: 1713
Location: Frozen Tundra of Minnesota | Uh-Oh! Tony is going to plug in and go electric!!!!  |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | Yes |
|
| |
|
Joined:
August 2003
Posts: 4619
Location: SoCal | Problem with the Hurricane is that some players took off the pickguard. At least with a template, I could make one and cover the holes in the wood.
I don't need it to protect from use of picks but more for appearance. So far, never found someone selling an original. Everything else works well, matched finish of my Tornado.
No problem with my 2 1658's, 1659, Jorgenson signature Takamine, and the Martin D12-45. Working on a trade for the 1679 CL (from the 2000 Elton John tour) that I sold to one of my staff several years ago. Got the 6759 from one of the players on the tour...Kim originally said "you know we officially own this" - guess after Fender, I am home clear.
|
|
| |
|
Joined:
August 2003
Posts: 4619
Location: SoCal | Oh, forgot my 1966 electric Wurlitzer 332 style 12-string; made in Italy by Welson. Only guitar I have see that has a selection of "wild".
And a small soundhole acoustic shiny bowl Balladeer 12-string.
Let my 1688 go recently. May regret later but went to a great guy in Texas.
Edited by Tony Calman 2015-05-01 10:59 PM
|
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | I might even have an extra, all I got to do is find it. |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | If you have a tornado copy that one |
|
| |
|
Joined:
August 2003
Posts: 4619
Location: SoCal | I'll check it out, thanks |
|
| |
|
Joined:
December 2001
Posts: 7222
Location: The Great Pacific Northwest | Tony, do you have a picture of the guitar (the pickups area). I have some, but not sure which storm they are for, but I know they don't fit the standard Tornado or Thunderhead... sooooooo I'm thinking they might be for the Hurricane. |
|
| |
|
Joined:
August 2003
Posts: 4619
Location: SoCal | Had an Ovation pickguard, unknown but two p/u's that the seller years ago had ordered but not the right one. Guitar came in okay but the pickguard broke. Did a little sanding to remove part of the pk, sealed the crack, and ok but would still like to get the right one. This is a pic from google, origin from an OFC'er poster.
Edited by Tony Calman 2015-05-02 9:12 PM
 (Hurr-8.jpg)
Attachments
----------------
 Hurr-8.jpg (40KB - 1 downloads)
|
|
| |
|
Joined:
June 2002
Posts: 6197
Location: Phoenix AZ | There are 4 styles of STORM pick guards
1) the one Tony shows above which was std on all the first generation STORM 6 and 12 string guitars
2) sometime in '68 somebody had the great idea to include cutout holes so you could adjust the PU heights without removing the PG
3) same version as 2) but for the long neck attachment versions
4) a non-ply rough finish version for the Eclipse model |
|
| |
|
Joined:
August 2003
Posts: 4619
Location: SoCal | Now there is five, the Top Cat Special. However, I will keep looking for an original.
 (HURR-2-2.jpg)
Attachments
----------------
HURR-2-2.jpg (141KB - 1 downloads)
|
|
| |
|
Joined:
August 2003
Posts: 4619
Location: SoCal | sanded at 1:30 in the morning
 (HURR-1-a.jpg)
Attachments
----------------
HURR-1-a.jpg (32KB - 0 downloads)
|
|
| |
|
Joined:
December 2006
Posts: 6994
Location: Jet City | Standingovation - 2015-05-02 7:59 PM There are 4 styles of STORM pick guards 1) the one Tony shows above which was std on all the first generation STORM 6 and 12 string guitars.... The very first ones didn't have 'Ovation' etched in. Here's a '67... 
|
|
| |
|
Joined:
August 2003
Posts: 4619
Location: SoCal | Tornado has ser 1222 with the Ovation logo...no evidence of a serial on the Hurricane on neck, under neck plate, inside label, etc. The pickguard I repaired and adapted had cutouts for two p/u's but narrower distance than the Hurricane guard.
However, as some of us have done, Glen Campbell truss rod covers could have been put on various guitars that merely had a black cover. Wouldn't be surprised to find that some early Storm pickguards were replaced when the newer logo version was available. |
|
| |
|
Joined:
December 2006
Posts: 6994
Location: Jet City | This one is #535 
|
|
| |
|
Joined:
August 2003
Posts: 4619
Location: SoCal | My Hurricane has KURZ carved into it under the plate, no numbers.
Damon, I understand the holes for the screws but what were the four larger holes for...not on my Hurricane but on my Tornado (as well as the serial number). I thought at first that it would be to bolt on the neck but the Hurricane 12-str must have more tension than a 6-str??? |
|
| |
|
Joined:
December 2003
Posts: 1889
Location: Central Massachusetts | The four big holes are the screws into the neck. The medium sized hole in the middle pushes against the neck and sets the angle in cooperation with the four neck screw/bolts. Basically you use the hole in the middle as a pivot point to set the angle. The four smaller holes are where the neck plate screws in. At least that's how it works on my Eclipse. |
|
| |
|
Joined:
August 2003
Posts: 4619
Location: SoCal | But the question remains that from what I have read, the Tornado body was used for the Hurricane, yet the Hurricane does not have the screws to the neck. Yet, a 12-str should exert more pressure than a 6-str.
In addition, my Tornado doesn't have the middle hole/bolt that is in Damon's photo.
As to the Tornado, the heads of the bolts look close to the ones used to put furniture parts together (large flat phillips head cam lock fittings). My curiosity does not extend to removing them as the neck is good as it is.
 (Cam.jpg)
Attachments
----------------
Cam.jpg (15KB - 0 downloads)
|
|
| |
|
Joined:
August 2003
Posts: 4619
Location: SoCal | This is why the pickguard did not fit, probably would have fit the highlighted guitar on the right but not the 12-string on the far right which is similar to mine.
Edited by Tony Calman 2015-05-03 9:38 PM
 (aa.jpg)
 (aa.jpg)
Attachments
----------------
aa.jpg (782KB - 2 downloads)
aa.jpg (114KB - 0 downloads)
|
|
| |
|
Joined:
August 2003
Posts: 4619
Location: SoCal | Well, at least my modified pickguard covers the prior screw holes until I find the right one.
 (LLAMA-1.jpg)
Attachments
----------------
LLAMA-1.jpg (105KB - 0 downloads)
|
|
| |
|
Joined:
December 2001
Posts: 7222
Location: The Great Pacific Northwest | damon67 - 2015-05-03 3:23 PM
This one is #535
Tony there were two versions of attachment, but I'll get to that in a minute as they both look the same.
In this photo there are the 4 screws for the neck bolts. The two versions were that initially they were just wood screws to the neck, later they were the standard bolts that appeared on most of their solid-bodies as well. The hole in the middle is for a "set screw" of sorts to set the neck angle. The four other screw holes (small ones) are just the ones that hold the plastic cover in place as there wasn't an actual "neck plate."
Miles |
|
| |
|
Joined:
December 2001
Posts: 7222
Location: The Great Pacific Northwest | Tony can you measure the distance between the two bottom adjustment screws of the pickups. This is essentially measuring the center-center of the two pickups. The guards I have are notched for adjustment screws being 3 1/8" apart. |
|
| |
|
Joined:
December 2001
Posts: 7222
Location: The Great Pacific Northwest | Tony Calman - 2015-05-03 7:11 PM
But the question remains that from what I have read, the Tornado body was used for the Hurricane, yet the Hurricane does not have the screws to the neck. Yet, a 12-str should exert more pressure than a 6-str.
In addition, my Tornado doesn't have the middle hole/bolt that is in Damon's photo.
As to the Tornado, the heads of the bolts look close to the ones used to put furniture parts together (large flat phillips head cam lock fittings). My curiosity does not extend to removing them as the neck is good as it is.
They may look like camlocks, but they are regular neck bolts.
When you say "Hurricane does not have the screws to the neck. " what does that mean? The neck is attached with screws or bolts. |
|
| |
|
Joined:
August 2003
Posts: 4619
Location: SoCal | Miles, on the Hurricane under the back plate - no screws or bolts (or the four holes and center hole shown on Damon's pic), only the obvious holes of the small screws that I just took off to take the plate off. No serial number under the plate, just a crude carving of "Kurz". I even took a flashlight to see inside the 'f' holes for any residue of a label. No serial on back of headstock. Unlike an Adamas, there is no access panel so I can't tell if there was a serial number on a brace or heel.
No other evidence of screws or bolts or a serial number which is why I recorded it as 1968 v. the Tornado as 1967 on my Excel spreadsheet. I didn't expect that they were cam locks in the Tornado but they were a surprise due to their head size and flat.
However, as shown in the picture, Dave has or had two examples where one has a separation of almost 5" distance between the p/u's where another has the p/u's closer together (broken pickguard that I modified would probably have fit the guitar with the closer spaced p/u's. It definitely did not fit on my Hurricane or Tornado.)
Under the plate of the Tornado (serial # 1222), there are four bolt heads similar looking to a 'cam'.
I have no idea how the Hurricane neck is attacked either by inside screws under the top or glue. Not complaining as the neck is great even after all of these ? 47 years.
At this point, it doesn't really matter but it is interesting...sold off the Storm bass and the T-Head a few years ago but I have two great examples that play well of Ovation history. Amazing.
Edited by Tony Calman 2015-05-03 11:10 PM
|
|
| |
HURRICANE PICKGUARD
