|
|
Joined:
March 2009
Posts: 4
Location: Salt Lake City | I got a beautiful 12 fret wideneck balladder.
Serial #040275
Model #1122-4
It's never been dropped or dinged. I just had the Guitar Doctor polish the frets even though they have no wear, Did a complete setup on it, annotation and everything.
I even had him install a custom wound pickup very discreetly.
I have no idea what this thing is worth. And I don't know much about this guitar. It's natural finish had aged quite nicely. |
|
| |
|
Joined:
December 2003
Posts: 13987
Location: Upper Left USA | Welcome Chris!
We do much better with pictures but it sounds nice.
The 1122-4 is a "Classic Balladeer" hence the wider neck and Nylon strings.
Being the Price Police is a tough job but you can expect to be underwhelmed, especially in today's market. I think there is one on Ebay now. |
|
| |
|
Joined:
May 2008
Posts: 4996
Location: Phoenix AZ | 1122 is Artist Classic. Probably worth today about what it was when new (mid 3's). |
|
| |
|
Joined:
March 2009
Posts: 4
Location: Salt Lake City | Ebay Item # 270351148433. Comes with orginal 1975 Hardcase. I really need to unload this thing. Asking 750. |
|
| |
|
Joined:
December 2003
Posts: 13987
Location: Upper Left USA | What is the Custom Wound Pickup?
Preamp, Piezo, soundhole? |
|
| |
|
Joined:
January 2006
Posts: 1118
Location: NW Washington State | Just out of curiosity, I'm trying to figure out if this a nylon or steel string guitar. In the eBay auction, it looks like a nylon-style bridge fitted with steel strings. A "custom wound" pickup sounds like a magnetic pickup for steel strings. Was this originally made for nylon strings, or steel?
-Steve W. |
|
| |
|
Joined:
September 2006
Posts: 10777
Location: Keepin' It Weird in Portland, OR | I'm still new at this, and I have been wrong before...
But I think that if it has a square (rectangular) block to hold the strings, it supposed to be nylon.
quick link to listing for the curious and lazy :p |
|
| |
|
Joined:
December 2003
Posts: 13987
Location: Upper Left USA |  |
|
| |
|
Joined:
August 2007
Posts: 494
Location: Location Location Location | But I think that if it has a square (rectangular) block to hold the strings, it supposed to be nylon.
So, the top on this guitar wil not hold up with these strings? |
|
| |
|
Joined:
May 2008
Posts: 1555
Location: Indiana | Definitely a nylon string model. |
|
| |
|
Joined:
January 2006
Posts: 1118
Location: NW Washington State | Woody, who gets the penalty? Is it still up for review? |
|
| |
|
Joined:
January 2006
Posts: 1118
Location: NW Washington State | Some of the text in the auction seems to be a duplication of text in eBay #230328474266. What's up with that? |
|
| |
|
Joined:
March 2009
Posts: 4
Location: Salt Lake City | This jackass copied my text and pasted it onto his auction. How original. Down to the number of exclamation points. He probably cheated off his 2nd grade math paper. |
|
| |
|
Joined:
June 2006
Posts: 7307
Location: South of most, North of few | Originally posted by MWoody:
.
.
.
I can almost hear that bridge pulling away from the top now. |
|
| |
|
Joined:
November 2008
Posts: 1119
Location: Michigan | Originally posted by Old Man Arthur:
I'm still new at this, and I have been wrong before...
But I think that if it has a square (rectangular) block to hold the strings, it supposed to be nylon.
quick link to listing for the curious and lazy :p
http://emedia.leeward.hawaii.edu/frary/changing_strings.htm |
|
| |
|
Joined:
August 2007
Posts: 494
Location: Location Location Location | This jackass copied my text and pasted it onto his auction. How original. Down to the number of exclamation points. He probably cheated off his 2nd grade math paper. Chris, at this point, I think the steel strings on a guitar built for nylon strings is a bit more pressing of a concern. |
|
| |
|
Joined:
December 2003
Posts: 13987
Location: Upper Left USA | OK, I know better but what the hell, I'm old and so what.
Chris,
RE: "Woody, who gets the penalty? Is it still up for review?"
We do!
For even entertaining another Pawn Shop Dealer.
I resent it when (Sellers)* try to pump us up about their Vintage/Rare/Collectible whatever and they don't know what they have and they can't even tell a Steel strung from a Gut String!
Then you say "I really need to unload this thing" and posts it at a price on Ebay that says clearly you didn't do a lick of research and you didn't listen to anything we had to say.
Then I asked about the Custom Wound pickup (on a Nylon String Guitar) and you don't respond.
The OFC is a good group of people. We love to enlighten, encourage, share life and exchange guitars. We spend other peoples money very well!
But don't blow smoke up my butt and then complain that someone jacked your extensive write up!
Donate the guitar and exagerate on your tax receipt. At least it might get played.
I think the term I should have used is...
"Click" |
|
| |
|
Joined:
November 2008
Posts: 1119
Location: Michigan | Mmmm Woody, you said what we all were thinkin'. I just looked at what a new 1122 went for new via the price list... |
|
| |
|
Joined:
March 2009
Posts: 4
Location: Salt Lake City | I saw a web site saying it was for steel strings. It sounds remarkable both ways. Just had some jackass offer me 200 for it. I sat on it for 30+ years, I can wait another 20..lol. Like a fine wine, it only gets better with age. I got so many guitars. I don't have to sell it, I just want someone to have it who appreciates it. I am sure when Doc Portillo at the Guitar Doctor worked his magic, he glued the bridge and and all the frets. No srepair, it's just part of an initial 140 dollar setup. He makes any shitty guitar sing like Florence Nightengale. Not that Ovation is bad That guitar is not going anywhere. I gaurantee it. Actually I hope it doesn't sell. But I do love this forum. DiE hArds ovation fans,. that's cool ! |
|
| |
|
Joined:
May 2002
Posts: 1445
Location: Nova Scotia, Canada | Gluing bridges and frets wouldn't be part of any normal setup.
If that had to be done, as others have said, you need to lose the steel strings on that guitar. |
|
| |
|
Joined:
May 2008
Posts: 4996
Location: Phoenix AZ | Originally posted by chris_hansen:
That guitar is not going anywhere. I gaurantee it. I couldn't agree more ... |
|
| |
|
Joined:
April 2008
Posts: 498
| Originally posted by chris_hansen:
I saw a web site saying it was for steel strings. It sounds remarkable both ways. Just had some jackass offer me 200 for it. I sat on it for 30+ years, I can wait another 20..lol. Like a fine wine, it only gets better with age. I got so many guitars. I don't have to sell it, I just want someone to have it who appreciates it. I am sure when Doc Portillo at the Guitar Doctor worked his magic, he glued the bridge and and all the frets. No srepair, it's just part of an initial 140 dollar setup. He makes any shitty guitar sing like Florence Nightengale. Not that Ovation is bad That guitar is not going anywhere. I gaurantee it. Actually I hope it doesn't sell. But I do love this forum. DiE hArds ovation fans,. that's cool ! y'know Chris, you really should realize that some of the people here that you are talking to are the original designers, engineers, production crew, and even ex-ceo's, and Ovation endorsees and artists... your luthier is an idiot! and that guitar was built, set-up, and designed for nylon strings... good luck with the sale! just which member of Ovation customer service at the Mothership did you speak with? it most certainly was not JB or KK who would have answered your questions on that particular guitar, I doubt very seriously that the phone call was ever made. and with steel strings on it... it's an implosion waiting to happen.... custom wound pickup... yeah right. :rolleyes:
Glenn |
|
| |
|
Joined:
March 2002
Posts: 15664
Location: SoCal | Nobody seems to want to say it, but the guitar is a bit over priced. Probably worth about $300-$350. But I'd be worried about what's going on with it having steel strings on it..... |
|
| |
|
Joined:
July 2004
Posts: 766
Location: New Hampsha | Ovations are built well - I bet the bridge will hold OK. But the plastic tuner barrels on slotheads will be seriously grooved by the steel b and high e strings.
-click- |
|
| |
|
Joined:
May 2008
Posts: 1555
Location: Indiana | I'd be more concerned about the bridge and top.
The plastic tuner shafts were actually used on some steel strings from the factory, if I recall correctly. |
|
| |
1975 Ovation Balladeer
