|
|
Joined:
May 2006
Posts: 31
Location: Jonesboro, AR | I have found a Ovation guitar and dont know anything about them. I could use some help. First the label says Model 1537-X Elite 303266
I found out the serial number dates it a 1984. It is a slot head with gold tuners and did have electronics in it at one time, I think because it has three holes in the top side at the waist line and one on the bottom where you would find the plug. Also the back has a removeable circle plate. Very wide fret board. Could this have been set up as a nylon guitar? What does the X mean? This is in bad shape and would need a neck set. Cracked top. Can a person fix something like this or is it junk? I wish I had pictures but I don't. I forgot to mention that the bridge does not use pins, just holes thru the bridge like what a nylon guitar uses. It has steel strings now and could be why it needs a neck set.
Thank you for any help
wd |
|
| |
|
Joined:
August 2003
Posts: 4619
Location: SoCal | WD, the 1537 has a standard, non slothead, headstock...I have a pre-production one with a serial number of 301004. Yet, the X would indicate a prototype. The 1537 that went into limited production is a steel string that had two knobs (tone and volume) - thus two holes in the base side of the bowl. Later, there was a hole that secured the inside battery box.
So, a little confused on this...will leave it to our more knowledgable members to ask the right questions. |
|
| |
|
Joined:
January 2005
Posts: 4903
Location: Phoenix AZ | My guess is that it was an Elite Classical prototype of some sort. |
|
| |
|
Joined:
December 2004
Posts: 1116
Location: Keller, TX | TTIUWP!
Any way to post pictures? |
|
| |
|
Joined:
May 2006
Posts: 31
Location: Jonesboro, AR | Thank you for all the help. I dont own the guitar but may purchase it. I will try to get pictures. Could this be of any value?
Thanks
wd |
|
| |
|
Joined:
December 2004
Posts: 1116
Location: Keller, TX | The 1537 is known to be one of the better sounding guitars that Ovation has made. Usually demands a premium price...in good condition. One that is beat like your describing usually isn't worth much to resell. Someone at the tour had one that was pretty beat and the factory told him they would have to replace the top and bowl, leaving him with a new guitar and old neck. Definately not worth it.
Basically, if it has a price that you are willing to pay for the sound that it makes, buy it. Replacing a top can be pretty expensive. If it is as beat up as you say, don't expect to buy it and hope to resell it for a profit.
There are probably better condition Balladeers available for less. |
|
| |
|
Joined:
March 2005
Posts: 12759
Location: Boise, Idaho | It depends on how bad the top is. If it just has finish cracks, a regular 1537 may be worth $500 or so, but this appears to be an oddity. Maybe someone put a different neck on it, which may be too bad. |
|
| |
|
Joined:
March 2005
Posts: 1421
Location: Orange County, California | I emailed him back channel. I'm interested in the project if I can actually get this one.....
Stephen!!! :mad:
:D :D :D
Let see what the pics and the mothership say ok? |
|
| |
|
Joined:
May 2006
Posts: 31
Location: Jonesboro, AR | Not a cutaway and does not have the standard guitar round sound hole, Leaf holes (?) on treble and bass sides. And slot head. Neck looks original but does not have any markers on the fret board, the best I recall. |
|
| |
|
Joined:
December 2003
Posts: 13996
Location: Upper Left USA | Prototypes can be "valuable" but not so much in a monetary way. More historical. Many of them didn't work out, probably why there wasn't a Classical Adamas Elite issue.
If its as I imagine it would hold some real "interesting" value!
Go Fred! |
|
| |
|
Joined:
May 2006
Posts: 31
Location: Jonesboro, AR | Are neck sets hard to do on these guitar? |
|
| |
|
Joined:
March 2002
Posts: 15678
Location: SoCal | On Ovations (from what I've been told), neck resets are actually bowl bends, where the body is heated up and bent to the desired angle. I've never actually seen this done.
We've seen nylon string Elites before (I've got photos of at least 2 that I've seen come up on ebay). There was one for sale 4-5 months ago at a music store with an online pressence. It sold pretty quickly just after we became aware of it. |
|
| |
|
Joined:
January 2005
Posts: 4903
Location: Phoenix AZ | Moody, I'm pretty sure the bowl bend in only required on the old shiny bowl guitars with the wooden neck block. Bolt-ons, K-bars and the rest should be adjustable at the attachment point. But what the hell do I know, I'm just an idiot who stores leftovers for a living. Dave |
|
| |
|
Joined:
March 2005
Posts: 1421
Location: Orange County, California | Certainly not for the mothership. I've never heard of a luthier screwing one up, but I've heard of a few that wouldn't work on a "plastic guitar"... :D
Lets see what it is first. John Budny said he's never heard of a slothead 1537, except for some pics of a classical that "resembled" a 1537, so no definitive answer there. Could've been a custom order, or fiday afternoon employee project. I don't think the factory even implies that they have kept perfect records. Where's Bill when we need him!? His opinions are entertaining if not enlightening. :D My hope is that it might have been a 1537 at one time. |
|
| |
|
Joined:
March 2002
Posts: 15678
Location: SoCal | Tup, you are absolutely correct in the "bowl bend" thing. My mistake, but what do I know, I'm just a small time thug who's been hit in the head too many times...... |
|
| |
|
Joined:
May 2006
Posts: 31
Location: Jonesboro, AR | I dont know a lot about Ovations so here is the question. Is the top bracing the same on the nylon model and the steel string. The top is not bowed up but the neck looks like it is seperating at the heel.
thx
wd |
|
| |
|
Joined:
January 2005
Posts: 4903
Location: Phoenix AZ | Guitars DESIGNED for steel strings and guitars DESIGNED for nylon strings will usually have different bracing patterns. A digital camera could clear up the mystery very fast. Dave |
|
| |
|
Joined:
May 2006
Posts: 31
Location: Jonesboro, AR | Im still thinking about this project. Just got back from looking at it again. I notice something new every time I look at it. The saddle on the bridge is in 6 pieces, not one single piece. There are marks on the bridge as if nylon strings had been tied on it. Does the multi piece saddle mean anything special. As always all the help I can get is helpful and appricated.
Also, two holes in the back on the treble bout, two plugs??
Thanks
WD |
|
| |
|
Joined:
March 2002
Posts: 15678
Location: SoCal | Dave's right. A pic of the bridge could clear this up..... |
|
| |
|
Joined:
January 2005
Posts: 4903
Location: Phoenix AZ | Multi piece saddle is standard. I'm guessing normal bridge that someone tied nylons on. The two plugs are for the mono and stereo output, also standard. Dave |
|
| |
|
Joined:
May 2006
Posts: 31
Location: Jonesboro, AR | OK I have pictures in the gallery, what do you think? |
|
| |
|
Joined:
March 2002
Posts: 14842
Location: NJ | That thing is SWEET!!!
(but it should have nylons on it, tho . . .) |
|
| |
|
Joined:
May 2006
Posts: 31
Location: Jonesboro, AR | Here is a picture  |
|
| |
|
Joined:
March 2005
Posts: 12759
Location: Boise, Idaho | Strange, but beautiful. I'm not so sure it should have nylons. Maybe it was a prototype for a Folklore-type Elite. |
|
| |
|
Joined:
March 2002
Posts: 15678
Location: SoCal | Definitely very cool. And definitely a nylon string guitar. The bridge is a classical bridge and the tuners are the same. Ovation has built several nylon string 1537's. They pop up every once in a while.
What makes this one unique is that it's a supershallow bowl. Every other one I've seen has been a deep or mid depth bowl.
But definitely a nylon string...... |
|
| |
Need old Ovation help!!!! PICS
