|
|
Joined:
December 2006
Posts: 36
Location: Palacios, Texas | Howdy everyone! Well I need to pick your brains guys. I am having a problem with an undersaddle Fishman pickup. I am thinking that it might be a saddle problem, but not real sure.
It has a bone comp saddle, and an active Fishman unersaddle pickup. The E-A-D strings produce good sound, but the G-B-E strings produce very little sound. I pulled the saddle out to check the pickup and noticed that the bottom of the saddle has what looks like voids or air pockets on the G-B-E side of the saddle. Can these voids cause the problem? The pickup looks fine. Any advice will be very helpful.
Thanks in advance
Bill |
|
| |
|
Joined:
January 2003
Posts: 146
Location: Ct./ USA | Please, ASAP call John Budney @ 860-379-7575.He is one of the go to guys in service. It is possible that a member may have an answer stay tuned, same Ovation channel, same Ovation time. I hope you can resolve this issue because I too dislike tecnicial difficulties. Have a happy FOURTH OF JULY Bill! |
|
| |
|
Joined:
January 2005
Posts: 4903
Location: Phoenix AZ | You need to have good solid (and flat) contact between the bottom of the pickup and the bridge, and between the top of the pickup and the bottom of the saddle. I can't imagine voids in the saddle material would be condusive to a good contact. I'd cut another saddle. They are reasonably cheap. Dave |
|
| |
|
Joined:
October 2006
Posts: 5575
Location: big island | if those "voids or air pockets" are preventing the pickup from direct contact with the saddle, then the answer is yes. if you sanded the bottom of the saddle just a bit, would that remove the voids? ya' gotta sand the whole length of the saddle ensuring it remains level. if you sand off too much you might negatively affect your action. if just a bit of sanding will not help, then go to a luthier and get a proper saddle made. |
|
| |
|
Joined:
September 2006
Posts: 10777
Location: Keepin' It Weird in Portland, OR | |
|
| |
|
Joined:
September 2006
Posts: 10777
Location: Keepin' It Weird in Portland, OR | |
|
| |
|
Joined:
September 2006
Posts: 10777
Location: Keepin' It Weird in Portland, OR | |
|
| |
|
Joined:
September 2006
Posts: 10777
Location: Keepin' It Weird in Portland, OR | If the saddle is not connected to the pick-up...
If the pick-up is a separate unit, and the saddle just lays on top of the pick-up...
[Like my 1861 or one of the CS257's]
I would get a new saddle.
Take the saddle (or the whole guitar) down to the guitar shop, and find a nice solid saddle that fits.
[And you can ask their luthier-dude advice while you're there]
JMO-- That's how I did Auto Repair... Go to the parts store, and Ask!
edit-- Don't know what my computer, or server, or comcast or whoever did....
But sorry about all the above posts, I can't delete anymore :eek: :mad: :( very embarrassed! |
|
| |
|
Joined:
September 2006
Posts: 10777
Location: Keepin' It Weird in Portland, OR | [Like my 1861 or one of the CS257's]
That would be 4861... I guess that was a Freudian-wish finger slip. |
|
| |
Help, need advice on undersaddle pickup
