|
|
Joined:
May 2004
Posts: 36
Location: Tampa, Florida | I was reading over my manual, and it said 1-3 shims were put under the saddle to achieve standard action. Is it alright to take out all the shims? |
|
| |
|
Joined:
January 2004
Posts: 648
Location: Florida | Yes |
|
| |
|
Joined:
December 2001
Posts: 10583
Location: NJ | as long as the strings do not buzz on the frets or bridge. |
|
| |
|
Joined:
February 2002
Posts: 5750
Location: Scotland | and as long as there is sufficient saddle hieght above the bridge to achieve a good string break angle, or volume, sustain & tone can suffer. |
|
| |
|
Joined:
December 2003
Posts: 13997
Location: Upper Left USA | I had just adjusted a friend's Yamama. It had some years and shifting. Took the truss rod to the "If this snaps I'll have to buy him an Ovation" point and then shaved the saddle about 3/64". A little oil and elbow grease and it's sweet now.
Its not an O mind you but it has a sweet voice. |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | what they said./ |
|
| |
|
Joined:
May 2004
Posts: 295
Location: Ottawa, Ontario, Canada | Even if there's no string buzz anywhere on the neck, if there's not enough downward angle of the strings behind the saddle, you'll have intonation problems. |
|
| |
Is having no shims ok?
