|
|
Joined:
September 2006
Posts: 713
Location: Alberta, Canada | What kind of adjustment(s) can be made on these heads and how do you it/them. Tools required, etc.
I'm finding some play with a few of the tuners on my 1112-4 and I'm hoping they just need an adjustment.
Podium now available...one at a time please...I'm having a gray day, so no big words please!
:) :) :)
Dave |
|
| |
|
Joined:
November 2003
Posts: 11039
Location: Earth·SolarSystem·LocalInterstellarCloud·Local Bub | make sure the screw at the button is snug. If it is loose, there can be play in the worm |
|
| |
|
Joined:
September 2006
Posts: 713
Location: Alberta, Canada | Thanks, Jeff. Is that the only adjustment that can be made? |
|
| |
|
Joined:
November 2003
Posts: 11039
Location: Earth·SolarSystem·LocalInterstellarCloud·Local Bub | There's not a whole lot more that can be done. You can remove that screw and then the worm and clean and deburr, but if it's stripped it's time for a new one. |
|
| |
|
Joined:
September 2006
Posts: 713
Location: Alberta, Canada | Can you over tighten these screws? I don't mean to the point of stripping the threads, but, to where you can damage the gear? |
|
| |
|
Joined:
January 2006
Posts: 1118
Location: NW Washington State | And if you oil the washers between the buttons and the machines, will the tuners be smoother or will they slip? |
|
| |
Schaller Heads
