The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: "Got time to breathe, got time for music." --Briscoe Darling.



Jump to page : 1
Now viewing page 1 [25 messages per page]
Tuners

View previous thread :: View next thread
   Members Forums -> Ovation Electric GuitarsMessage format
 
smmjbarney
Posted 2014-11-28 12:20 PM (#501369)
Subject: Tuners


Joined:
August 2013
Posts: 14

Just wondering if anybody can confirm or deny this. The tuners on my breadwinner look like Schallers with the Ovation logo on them. Schaller has a M6 nylon light series that look very similar to the ones I have. I had to look at Schallers online catalog to find them. They have a dimensioned drawing also but I have not taken my vernier calipers out to check them yet. Does anyone know if these are the same tuners? If so, how hard would it be to pop off the back caps and install the Ovation logo ones? I don't need any but it would be nice to know for future reference.

Edited by smmjbarney 2014-11-28 12:21 PM
Top of the page Bottom of the page
Old Man Arthur
Posted 2014-11-28 1:10 PM (#501374 - in reply to #501369)
Subject: Re: Tuners



Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR
Yes, I believe that those are the same tuners.
Top of the page Bottom of the page
bburg
Posted 2015-01-23 1:31 PM (#505009 - in reply to #501369)
Subject: Re: Tuners



Joined:
August 2009
Posts: 1137

Location: Germany, where delicious wine is growing (Rheinh)
They ARE the same! In Germany they are almost available, if anybody needs them, but only as a set. I've also tried to swap the caps on a set M6 mini from my Pacemaker, but with no success. Most of the original Ovation logo caps got damaged by pulling them out of the old ones. So I don't started to do that on the new ones ,too.

Bernie
Top of the page Bottom of the page
numbfingers
Posted 2015-01-24 10:50 AM (#505024 - in reply to #501369)
Subject: Re: Tuners


Joined:
January 2006
Posts: 1118

Location: NW Washington State
The nylon type are hard to find in the U.S. I'd like to get some for a couple of guitars that are neck-heavy.

I've read somewhere that you will wreck the Schaller/Ovation caps if you try to pry them off from the outside. Someone suggested that if you remove the tuning button, washers, and worm gear assembly, you can poke something through the hole on the side and push the cap out. You might want to try that on an old worn-out tuner to see if it's possible.

-Steve W.
Top of the page Bottom of the page
numbfingers
Posted 2015-01-31 2:44 PM (#505174 - in reply to #501369)
Subject: RE: Tuners


Joined:
January 2006
Posts: 1118

Location: NW Washington State
Here's a 12-string set on eBay US that might maybe possibly be the same size and mounting as the original Breadwinner/Viper tuners: http://www.ebay.com/itm/331411634633?

-Steve W.
Top of the page Bottom of the page
danomyte
Posted 2015-03-29 4:11 PM (#508139 - in reply to #501369)
Subject: Re: Tuners



Joined:
January 2014
Posts: 402

Location: Taxed To Death State
They look the same. Good price for 2 new sets.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclubâ„¢ Copyright (c) 2001
free counters
(Delete all cookies set by this site)