|
|
Joined:
December 2023
Posts: 2
| Hello to you all, I appreciate the opportunity to pick your brains for knowledge. I'll try to make a long story just long, so here goes. I was gifted a beautiful Adamas 1681-7 by my late father many years ago. I feel that's important to share because the guitar came with a sentimental attachment long before i knew the dollar amount these pull down. That said, I loaned the guitar to a friend to cover them through some gigs because of blah blah to their guitar. I'm sure you can guess the next part. So best I can tell the bezel around the preamp is busted, and that is what keeps the preamp from falling into the guitar. Could I use a faceplate from the FET3 OR OP24 to fix the problem? The absolute last thing I would want to do is alter the body or the guitar to put a new preamp in it..any advice I would be grateful for. I'd like to stick around as well if you'll have me!! Thank you!! |
|
| |
|
Joined:
December 2001
Posts: 7222
Location: The Great Pacific Northwest | I have updated your membership and moved this post to the General Area where others can answer. Please provide a link to a picture (or upload one) of the current pre-amp, but assuming no modifications, you should be able to find a replacement and just drop it in. |
|
| |
|
Joined:
December 2023
Posts: 2
| If anyone is looking for closure, I ordered a faceplate from mydustyguitar.com and it saved the day. Swapped them out and plugged in. First time it had been amp'd in years.. |
|
| |
I have questions..
