|
|
Joined:
November 2008
Posts: 5
Location: Salt Lake City | Hello all,
I hope someone here can help me. Does anyone know how to add a little relief to the neck of a model 1639 Balladeer Special?
Thanks
Pier Calacino |
|
| |
|
Joined:
October 2005
Posts: 4051
Location: Utah | Pier, welcome aboard! It's nice to see another SLC member.
If you have a truss rod cover on the headstock, take it off and you'll see a nut or hex socket. If you don't have a truss rod cover, look inside the bowl where the neck attaches. There may be a socket or nut at that end.
Righty-tighty, lefty-loosey. To get more relief, loosen the truss rod. Make a small adjustment, about 1/8 turn, and see what effect it had. Don't make more than about a 1/4 turn change on the truss rod in a day. Let it sit overnight and see where it settles. |
|
| |
|
Joined:
August 2003
Posts: 2246
Location: Yucaipa, California | Pier, this might help:
 |
|
| |
|
Joined:
December 2006
Posts: 6268
Location: Florida Central Gulf Coast | Tim, I love this diagram. I remember you said it wasn't quite right when you first posted it.
Is this what you were looking for?
 |
|
| |
|
Joined:
October 2008
Posts: 639
Location: NW of Philadelphia | That about 'splains it all! |
|
| |
|
Joined:
August 2003
Posts: 2246
Location: Yucaipa, California | iffy,
The thing that bothers me is that I don't have a correct "righty" arrow. I like your version, but would like it to be the same as the "lefty" only mirrored. That's something I cannot do with the setup I have here at work...
Also, please ANYONE, feel free to "tinker" with this diagram to suit.... it's only a visual intended to help others.... ;) |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | I think the '39 would be in the bowl, if there is one. |
|
| |
|
Joined:
November 2006
Posts: 3969
| Originally posted by 2ifbyC:
Tim, I love this diagram. I remember you said it wasn't quite right when you first posted it.
This any better?
 |
|
| |
|
Joined:
December 2006
Posts: 6268
Location: Florida Central Gulf Coast | Bingo Serge! By Jove, I think you've got it...  |
|
| |
|
Joined:
August 2003
Posts: 2246
Location: Yucaipa, California | Spot on! Great Job!! Now I can retire my hackneyed attempt! Very Cool! |
|
| |
|
Joined:
November 2006
Posts: 3969
| Thanks - I'll post it up to the ning site. |
|
| |
|
Joined:
November 2006
Posts: 3969
| Up on ning:
 |
|
| |
|
Joined:
August 2003
Posts: 2246
Location: Yucaipa, California | ...uh, thanks for the credit, but I'd prefer a check. :rolleyes: |
|
| |
|
Joined:
December 2006
Posts: 6268
Location: Florida Central Gulf Coast | OK! Just fer Tim...
 |
|
| |
|
Joined:
August 2003
Posts: 2246
Location: Yucaipa, California | ...thanks. I'll send it to the bank. Should cover everything. If not, I'll have them contact "Deep Pockets Iffy" direct! |
|
| |
|
Joined:
April 2008
Posts: 2985
Location: Sydney, Australia | Originally posted by 2ifbyC:
OK! Just fer Tim...
|
|
| |
|
Joined:
August 2003
Posts: 2246
Location: Yucaipa, California | ...here? There's always an opportunity to crack wise! |
|
| |
|
Joined:
November 2008
Posts: 5
Location: Salt Lake City | All,
I really do appreciate all the advice provided here and the time everyone took to post but there is one problem. As mentioned in my first post, my Balladeer is the “SPECIAL” what this means is that it does not have a truss rod. It is what Ovation has listed as the foam neck which I think is the polyurethane neck they used in circa 82-83 I believe. So with this being said I still have an issue and no way to adjust the neck other than possibly putting on heaver strings.
Is there another solution any of you are aware of?
Thanks in advance.
Pier |
|
| |
|
Joined:
November 2003
Posts: 11039
Location: Earth·SolarSystem·LocalInterstellarCloud·Local Bub | I've seen similar diagrams in a "Men's Health" mag. |
|
| |
|
Joined:
March 2005
Posts: 12759
Location: Boise, Idaho | You didn't really tell us what the problem was. We seem to have assumed the neck had some warp or bow, but that is not likely with a urethane neck. Is the action too high or low? If you can't get it right with shims under the saddle, the neck may be pulling into the body. It may be removable with 2 bolts and could be reset. That might be something you'd want to send to the factory or a luthier. If you are the original owner, the factory might do it under warranty. |
|
| |
|
Joined:
March 2002
Posts: 14842
Location: NJ | Have you looked at the OTHER end of the neck (inside the body) for the truss-rod adjustment? |
|
| |
|
Joined:
October 2005
Posts: 5330
Location: Cicero, NY | Originally posted by (Mauvais) Beal:
I think the '39 would be in the bowl, if there is one. So it's possible he actually doesn't have a truss rod to adjust, Beal? |
|
| |
|
Joined:
November 2008
Posts: 5
Location: Salt Lake City | thanks again folks and no there is not a truss rod in the neck to make an adjustment (that would be too easy). The neck needs some relief added to allow a little more clearance between the 1st - 4th frets for the E, G and B strings.
the neck is straight or flat with no relief and it would help if I could add just a little relief to the neck. It seems the only choices I have is to try heavier gauge string to see if that will bow it a bit or shim-up the bridge which I don't really want to do because its set perfect for my style. I just need some more clearance. Yes I am the orignal owner;I purchased it in 1983 or 84 if I remember correctly.
Pier |
|
| |
|
Joined:
November 2008
Posts: 5
Location: Salt Lake City | thanks again folks and no there is not a truss rod in the neck to make an adjustment (that would be too easy). The neck needs some relief added to allow a little more clearance between the 1st - 4th frets for the E, G and B strings.
the neck is straight or flat with no relief and it would help if I could add just a little relief to the neck. It seems the only choices I have is to try heavier gauge string to see if that will bow it a bit or shim-up the bridge which I don't really want to do because its set perfect for my style. I just need some more clearance. Yes I am the orignal owner;I purchased it in 1983 or 84 if I remember correctly.
Pier |
|
| |
|
Joined:
March 2005
Posts: 12759
Location: Boise, Idaho | The slots in the nut may have worn down, which would be the easiest fix next to adding shims. Get a new nut with slots that aren't cut as deep. Resetting the neck would add to the height at the upper frets. I doubt you're going to bow a urethane neck. That was the purpose. You might only get a buzz at the upper frets. |
|
| |
Neck Adjustment Help?
