|
|
Joined:
September 2005
Posts: 3619
Location: GATLINBURG TENNESSEE :) | 1537 |
|
| |
|
Joined:
March 2002
Posts: 15677
Location: SoCal | You mean besides the two dots on the bridge and the screw in the fretboard?
Nope.... |
|
| |
|
Joined:
November 2002
Posts: 3651
Location: Pacific Northwest Inland Empire | Actually, another thing. Is it possible to get an unemcumbered photo of the label like that? I mean, you have to shoot through the epaulet hole to get it, right? |
|
| |
|
Joined:
March 2005
Posts: 12759
Location: Boise, Idaho | It's possible and it looks like the label, correctly showing it "upside down" if you blow up the picture of the front of the guitar. That also shows that someone figured they'd "fix" the floating fretboard by running a screw through it. |
|
| |
|
Joined:
April 2004
Posts: 13303
Location: Latitude 39.56819, Longitude -105.080066 | At a starting bid of $399 and no reserve who cares!
Buy a screwdriver on the way to picking up the guitar and remove the screw when you get home!
BOOM....one of the legendary 1537's on the cheap! |
|
| |
|
Joined:
January 2006
Posts: 1128
Location: NW Washington State | Do we have a member in Aurora, Colorado- same place as the auction? |
|
| |
|
Joined:
January 2006
Posts: 5881
Location: Colorado Rocky Mountains | I'm in Denver and Aurora is a suburb. The seller could be 10 or 30 miles away depending upon the address. I could probably take a ride out there tomorrow evening. The auction closes Saturday afternoon. If this is something that would be helpful, contact the seller and set it up, then send me the info via PM. |
|
| |
|
Joined:
February 2004
Posts: 1634
Location: Warren,Pa. | I have spent $400 on lesser Ovations that needed more work. I just considered I was saving a guitar from the junk pile. This one would be a very worthy rescue.
Then again, gone are the days when I would spend $400 on a guitar rescue. The wealth has evaporated for such things : ( |
|
| |
|
Joined:
July 2005
Posts: 1609
Location: Colorado | I am game too...I live about 20 miles away....contact the seller....pm me and/or professor....Brad - I can drive if it is prior to Saturday....might just go myself |
|
| |
|
Joined:
December 2008
Posts: 1455
Location: Texas | Originally posted by moody, p.i.:
You mean besides the two dots on the bridge and the screw in the fretboard? Did the factory ever bolt the bridges on any 1537's? I just picked up a 1537 with a bridge and interior that look nearly identical to the photos below from Jerome's site. If it was an aftermarket mod, it was well done.
 |
|
| |
|
Joined:
August 2003
Posts: 4619
Location: SoCal | remember back a few years...I rec'd a 1537 where an individual screwed down the floating fretboard, probably believing that it was coming up.
released the screw and the fretboard came back to parameters...made a redwood wood plug for the hole. |
|
| |
|
Joined:
December 2008
Posts: 1455
Location: Texas | Originally posted by Tony Calman:
remember back a few years...I rec'd a 1537 where an individual screwed down the floating fretboard, probably believing that it was coming up.
released the screw and the fretboard came back to parameters...made a redwood wood plug for the hole. How much space should there be between the floating fretboard and the soundboard of the guitar? |
|
| |
|
Joined:
March 2005
Posts: 2791
Location: Atlanta, GA. | About the thickness of a credit card or less. |
|
| |
|
Joined:
December 2008
Posts: 1455
Location: Texas | Originally posted by cholloway:
About the thickness of a credit card or less. Sounds about right, I can just barely slip a thin guitar pick under mine. |
|
| |
|
Joined:
April 2006
Posts: 848
Location: Munich, Germany | Standing, my 1547 has the "dots" and bolts as well.
Best regards,
Kurt |
|
| |
|
Joined:
December 2008
Posts: 1455
Location: Texas | Originally posted by Koenig Kurt:
Standing, my 1547 has the "dots" and bolts as well.
Best regards,
Kurt Thanks Kurt. Someone here probably knows for certain if the factory ever bolted any of the 1537/47 bridges… I suspect that they did, based on the number of photos I've seen that have identical wooden dots. Of course, we've seen a few photos of screws in the floating fretboard also, and we KNOW those were not original. ;) |
|
| |
|
Joined:
September 2005
Posts: 3619
Location: GATLINBURG TENNESSEE :) | Wow! that went cheap! ... Anyone here get it? |
|
| |
|
Joined:
August 2009
Posts: 1137
Location: Germany, where delicious wine is growing (Rheinh) | Indeed!! Extremely cheap. In Europe they'll go around €750,00=$1050,00. Great guitar for the bucks.
Bernie |
|
| |
|
Joined:
September 2005
Posts: 3619
Location: GATLINBURG TENNESSEE :) | Indeed!! Extremely cheap. In Europe they'll go around €750,00=$1050,00 ...
WOW! ... I can't wait until my son and daughter-in-law transfer to Germany this fall. Then I can go visit them and bring along a couple guitars to sell at the same time. (: |
|
| |
|
Joined:
August 2009
Posts: 1137
Location: Germany, where delicious wine is growing (Rheinh) | Bryan, would be glad to see you here. Put a couple Adamas into your package, Adamas are really rare here. The prices for new ones are 2500,00€ and more.
The 1681-5 Patch has sold last week would have been gone around 1500,00€, more than $2000,00 in that great condition.
Bernie |
|
| |
|
Joined:
September 2005
Posts: 3619
Location: GATLINBURG TENNESSEE :) | Nice idea (: |
|
| |
Notice Anything Interesting About This One?
