|
|
Joined:
December 2004
Posts: 1116
Location: Keller, TX | Sad day.
I have been building a kit guitar since March. I am in the final stages. Today I was going to adjust the truss rod to add relief. Turned the wrench about 1/4 turn and the nut snapped off. :(
Since I have already glued the neck and fretboard to the body, how do I replace the truss rod? Do I have to disassemble everything? If so, how do I get the neck off with the least amount of damage to the body? (StewMac 000 kit)
Sad day. :confused: |
|
| |
|
Joined:
September 2006
Posts: 713
Location: Alberta, Canada | Damn, sorry to hear about that. Wish I knew a solution for you. Hopefully someone here knows. Best of luck.
Dave |
|
| |
|
Joined:
December 2003
Posts: 1889
Location: Central Massachusetts | You might try posting over at Kit Guitar Forum .. they seem to do a good job of helping each other through various problems in the process... |
|
| |
|
Joined:
December 2004
Posts: 1116
Location: Keller, TX | Thanks. I posted over there. Hopefully someone will know how to repair this. I have been working since March on this kit. Now I have a 90% completed really expensive lamp. |
|
| |
|
Joined:
November 2005
Posts: 1126
Location: Omaha, NE | I'm sure there's a way to solve this. There is a wealth of information over on Frank Ford's site (frets.com). When you look at some of the repairs he has made, I'm sure there is a way to fix you "lamp".
Good luck. |
|
| |
|
Joined:
September 2003
Posts: 9301
Location: south east Michigan | Now I have a 90% completed really expensive lamp. It's a major award!!.......Frageeeelay
That's a shame Tom.
Reminds me of the time a friend spent hours and hours on a balsa wood model plane. With as much a sense of pride and accomplishment you can have, he took it out to fly. 20 seconds... 10 straight up and 10 straight down. Nothing left but big toothpics. |
|
| |
|
Joined:
January 2005
Posts: 4903
Location: Phoenix AZ | Stewmac makes a special tool for dealing with a broken truss rod. I forget what it's called or exactly how it works but I remember looking at it and thinking it's one of those "why would I need to invest in this" kind of things. Until you need it. Dave |
|
| |
|
Joined:
November 2004
Posts: 1374
| Here ya go... seen it in action at Howie's..
truss rod repair kit
pretty nifty...
Glenn |
|
| |
|
Joined:
January 2005
Posts: 4903
Location: Phoenix AZ | Yup, that's it. Looks like it allows you to ream out a little around the rod, then re-thread the end of the broken rod and attach a new TR nut. Other than start over with a new neck, I can't think of how else to do it. Dave |
|
| |
|
Joined:
November 2005
Posts: 1126
Location: Omaha, NE | And only $230! |
|
| |
|
Joined:
August 2006
Posts: 2804
Location: ranson,wva | its a sonofabitch to seperate the fretboard from the neck and dig the tr out and put in a new one. my national has a broken tr....maybe ill buy one of the tr rescue kits from stewmac someday..jason |
|
| |
|
Joined:
June 2006
Posts: 7307
Location: South of most, North of few | Originally posted by Omaha:
And only $230! Might be a good idea for one guy to buy it and do a time share/rental policy on it, if there is enough interest. Dats alot o moola for a one time thing!! |
|
| |
|
Joined:
November 2004
Posts: 1374
| I nominate Mwoody to staff and maintain the community luthiers guild.. send those confusing tools and parts to him.
Glenn |
|
| |
|
Joined:
August 2006
Posts: 2804
Location: ranson,wva | i nominate my self..lol...2 of my resurections are enroute to canada as we speak....jason |
|
| |
|
Joined:
May 2003
Posts: 4389
Location: Capital District, NY, USA Minor Outlying Islands | Or you could buy it, use it, and sell it half price to a fellow OFC member, with the proviso that if he rents it out to another OFC member he charges them half, and gives you the other half. It could be years before you see your money.
Or you could go to your luthier. |
|
| |
|
Joined:
December 2004
Posts: 1116
Location: Keller, TX | Stewmac said I could create an access in the peghead and try to remove it that way. Will probably need one of Woody's famous truss rod covers. |
|
| |
|
Joined:
December 2003
Posts: 13987
Location: Upper Left USA | No problem Tom!
I have reveneered pegheads as well. Let me know what you need. |
|
| |
|
Joined:
December 2004
Posts: 1116
Location: Keller, TX | Snapped off the nut. Drilled a big hole in the peghead. Hammered, yanked, pushed, pulled, oiled, swore, hammered some more.
Finally got the broken rod out. New one slid in much easier. Not much damage, but I'm gonna have to refinish the peghead veneer (Rosewood), and cover the hole with a TRC (thanks Woodster!), and rebuild a new nut.
Thanks to all for your encouragement. I was crestfallen last week when this happened thinking the last 9 months were down the drain. |
|
| |
|
Joined:
August 2006
Posts: 2804
Location: ranson,wva | wtg tom...i knew you could do it...jason |
|
| |
|
Joined:
September 2003
Posts: 9301
Location: south east Michigan | There's not much that a little sweat & cussin' can't fix.
Good job Tom!! |
|
| |
Broken Truss Rod
