Viewing a thread - Getting Inside the Pre Amp

The Ovation Fan Club

Forum Search | Statistics | User Listing

Forums | Calendars | Albums | Language

Your are viewing as a Guest. ( logon | register )

Random quote: "Ovation Guitars really don't get the respect they deserve!" - Alex Pepiak

Jump to page : 1
Now viewing page 1 [25 messages per page]

Getting Inside the Pre Amp

View previous thread :: View next thread

The Ovation Fan Club -> Welcome Center

Message format

JIMMYGJR60

Posted 2014-09-22 5:36 PM (#494365)
Subject: Getting Inside the Pre Amp

Joined:
September 2014
Posts: 6

I have a 1990 Ovation Legend which has the OP 20 Pre-amp consisting of a volume control and three EQ sliders. One of the sliders came loose and fell out. I would like to know if anyone know how I can get into the top of the preamp to try to reinsert the slider. Unable to do this without removing the cover. I took out the four screws but the plate would not lift out. Is there screws underneath the decal with the setting numbers?

Old Man Arthur

Posted 2014-09-22 6:01 PM (#494366 - in reply to #494365)
Subject: Re: Getting Inside the Pre Amp

Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR

I am guessing that you really mean an OP-24 preamp.
Here is a photo that I found on the web that shows where the screws are...

The screws are actually under the decal.
The preamp is much bigger than the "face" of the preamp.
Once you remove the volume knob and the slider knobs...
Then the preamp will fall inside of the guitar once the four screws are removed.
I do not know if you can repair the slider... So I am not recommending that you do this.
But that is how to remove the preamp.

Jump to page : 1
Now viewing page 1 [25 messages per page]

Search this forum
Printer friendly version
E-mail a link to this thread


This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.Registered to: The Ovation Fanclub™ Copyright (c) 2001

(Delete all cookies set by this site)