|
| Random quote: "Believe me when I say that some of the most amazing music in history was made on equipment that's not as good as what you own right now." - Jol Dantzig |
 Vintage tan case plastic repair
| View previous thread :: View next thread | |
| Member Communities -> Bottom Feeding Luthiery Guild | Message format | |
Notalent |
| ||
| Hello. I have an older silver label 1111 in its original tan case. The case has a small crack that I’d like to repair. I plan to stop drill the crack, and then use the appropriate glue to fill the crack. The thing is, I don’t know if it’s made of a polyurethane, or ABS or ?? I called Ovation, and the folks I spoke with there were not sure of the case’s composition. I’d just like to make sure I’m using the right glue, as I don’t want to screw it up. Thank you. Notalent  | |||
| |||
| DetlefMichel |
| ||
Joined: May 2011 Posts: 755 Location: Muenster/Germany | |||
| |||
| Notalent |
| ||
| |||
| Jonmark Stone |
| ||
| Hi Notalent- Can't answer your question as to exactly what the comp of the material is. I can say that I've used both Bondo and traditional fiberglass layups with excellent results. Neither was pretty, but no issue with adhesion. If it's just a crack, epoxy should do the trick. This case was patched numerous times after 30 years of commercial flights. Got some mojo going for it...  (case.jpg) Attachments ----------------  case.jpg (92KB - 0 downloads) | |||
| |||
| Notalent |
| ||
| Jonmark, That case is the definition of artful patina. Wow. Thank you for the information. Notalent | |||
| |||
| Love O Fair |
| ||
Joined: February 2016 Posts: 1802 Location: When?? | |||
| |||
| arumako |
| ||
Joined: October 2012 Posts: 1034 Location: Yokohama, Japan | Jonmark Stone - 2019-01-07 6:49 AM ...If it's just a crack, epoxy should do the trick. This case was patched numerous times after 30 years of commercial flights. Got some mojo going for it... That's some serious mojo happening with that case Jonmark Stone! Just love pics like that... thanks for sharing! And Hi there Notalent, All the advice written above is excellent. The OFC features the nicest and most knowledgable folks. Epoxy has always worked well for me. Many of my cases crack at the butt-end where the 4 round metal buttons are... I usually drill a small 3/16th hole near the button and take a small allen wrench into the hole to push the button area outward from the inside (in my experience, there's usually enough space in this area to do this). Hysol 9462 (epoxy adhesive) works really well for applications like this, and it can be sanded and painted too. The strongest solution would be to lay-up fiberglass/resin coating (as Jonmark Stone says), but that tends to be a bit cosmetically challenged in the end. Hope this helps. Good luck, and make sure to take some pics and let us know how it goes! Seeing how folks go about fixes like this is always educational and fun to follow... Edited by arumako 2019-01-08 7:06 AM | ||
| |||
| DetlefMichel |
| ||
Joined: May 2011 Posts: 755 Location: Muenster/Germany | I had an old tan case with so may ugly repairs and a complete new "nose" (which I indeed made from fiberglass/epoxy!) that I decided to transform it into a "used airplane" design:
| ||
| |||
| Notalent |
| ||
| Dang. The artistry of the Ovation cats is insane! Another great case! It’s obviously an ‘airline’ case.... Ok, so it looks like a good 2 part epoxy should work. Thank you all. I’ll try to take a couple of photos, and then i’ll probably need to cover my work with stickers....lots of stickers...because no way will it look as cool as the stuff I’ve seen... Thanks again, Notalent | |||
| |||
| 2wheeldrummer |
| ||
Joined: February 2014 Posts: 704 Location: moline,illinois | DetlefMichel - 2019-01-08 12:11 PM I had an old tan case with so may ugly repairs and a complete new "nose" (which I indeed made from fiberglass/epoxy!) that I decided to transform it into a "used airplane" design:
That is a "Cool " case nice work Do you do custom orders LOL | ||
| |||
| Jonmark Stone |
| ||
Beautiful. Only needed a "remove before flight" flag. DetlefMichel - 2019-01-08 12:11 PM I had an old tan case with so may ugly repairs and a complete new "nose" (which I indeed made from fiberglass/epoxy!) that I decided to transform it into a "used airplane" design:
| |||
| |||
| DetlefMichel |
| ||
Joined: May 2011 Posts: 755 Location: Muenster/Germany | actually I have 2...
| ||
| |||
| Love O Fair |
| ||
Joined: February 2016 Posts: 1802 Location: When?? | |||
| |||
| DetlefMichel |
| ||
Joined: May 2011 Posts: 755 Location: Muenster/Germany | Love O Fair - 2019-01-09 5:56 PM Detlef.. I was in A&P school at the time I bought my first Ovation, so to me that airplane case would be quite appropriate for nostalgia's sake. Very, very cool! This began as a joke with the old ugly case, but if I would do it once again I would make it a little more accurate, this was made quite sloppy with some cans of laquer spray, some colour pens and some cheap decals. I jus had the idea to have a look like the case would have been made from a recycled airplane...some of the decals are nicely ambiguous:
| ||
| |||
| DanSavage |
| ||
Joined: June 2012 Posts: 2316 Location: Pueblo West, CO | |||
| |||
| DanSavage |
| ||
Joined: June 2012 Posts: 2316 Location: Pueblo West, CO | |||
| |||
| Jump to page : 1 Now viewing page 1 [25 messages per page] |
| Search this forum Printer friendly version E-mail a link to this thread |
| This message board and website is not sponsored or affiliated with Ovation® Guitars in any way. | |
| (Delete all cookies set by this site) | |