|
|
Joined:
August 2008
Posts: 90
Location: los angeles | Hello,
I am new to this forum and to Ovation guitars. I recently bought a UK2 which is in pretty good shape, EXCEPT that the previous owner appears to have rewired part of the guitar. The 3-way switch only gives one pup or the other, but not both pups at once. In the center position, the switch only activates the bridge pup.
Anyone know which color wires go to what parts of the switch? Also, does anything connect to either of the two screws on the side of the switch?
Anxious to get this guitar into full swing. Any help greatly appreciated. |
|
| |
|
Joined:
December 2001
Posts: 7247
Location: The Great Pacific Northwest | Remove and visually inspect the switch. Sometimes the spring pieces get a little worn or a little bit of film and causes the center position to only connect one pickup, or none sometimes.
Sometimes it is a wiring issue, but more often than not, it's a mechanical issue. |
|
| |
|
Joined:
August 2008
Posts: 90
Location: los angeles | Hi Mr Ovation,
I put a new switch in and have the same problem.
Cheers. |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | If you can get one and then the other you shouold be able to get both. Better check the wiring again. |
|
| |
|
Joined:
August 2008
Posts: 90
Location: los angeles | Hell Mauvais. I agree. That's the problem. The wiring looks to be messed with, and I'm not sure how it should be. Currently, there are a green and yellow wire on one side of the switch leading to the jacks, and a red - black - blue configuration on the other (to the pups). There are also 2 screws on the side of the switch with nothing on them - don't know if they're supposed to remain that way. Any further help definitely appreciated. |
|
| |
|
Joined:
August 2008
Posts: 90
Location: los angeles | Meant to say Hello Mauvais. |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | Yes, Hello to you too. should be pretty much like a Paul but I can't tell you the wires and colors. Keep at it, you'll figger it out, oh hell, you know what I mean. |
|
| |
|
Joined:
August 2008
Posts: 90
Location: los angeles | Thanks Mauvais. Will try. |
|
| |
|
Joined:
March 2005
Posts: 5567
Location: Blue Ridge Mountains | I opened the back cover on my UK II and here is the wiring: the switch has three top(from the back) wires and the bottom (underneath the top wires) has two wires:
Looking at the switch from the back with the wires towards the bottom of the switch cavity:
Top: (looking at the switch from left to right)
1st: Red
2nd: Black
3rd: Blue
Bottom (Left to Right)
1st: Yellow
2nd: Green
Hope that helps!
BTW: Welcome to the club! |
|
| |
|
Joined:
August 2008
Posts: 90
Location: los angeles | Thank you Music Mike. I truly appreciate your doing that. That's exactly the way it was wired on mine. Good to confirm. I finally gave up yesterday and brought it into a guitar tech who called me and told me it's now fixed. The good thing besides is that I'm now getting the guitar professionally set up. Can't wait. |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | I think you'll really like it. |
|
| |
|
Joined:
December 2006
Posts: 6996
Location: Jet City | I have a few guitars, that's my fav for sure. |
|
| |
|
Joined:
August 2008
Posts: 90
Location: los angeles | Yeah. I've had several in the past, and I kinda fell in love with this guitar at first play. |
|
| |
UK II 3-way switch wiring
