|
|
Joined:
June 2003
Posts: 4
| Hi Everyone!
I'm new to the bboard! Just wondering if anybody can point me in the direction for finding replacement tuners for my Ovation Breadwinner. They are chrome (silver) with black casing. Any info would be great! Cheers!!!---Jon |
|
| |
|
Joined:
March 2002
Posts: 15686
Location: SoCal | I'm guessing that Al or Miles might have some. But if not, I've got a set that is on a maple Viper neck that I was planning to sell with the neck. We can talk about it.
Where are you located? |
|
| |
|
Joined:
June 2003
Posts: 4
| Hi Paul,
I'm located in Bolingbrook, IL (suburb of Chicago). Just to clarify, the mounting screws on the tuners are set at an angle, not straight across. I'd definelty be interested if you were to sell them, but perhaps minus the neck. Cheers!!!---Jon |
|
| |
|
Joined:
February 2002
Posts: 5750
Location: Scotland | The Breadwinner had black nylon-bodied Schaller M6 machines. Stew-mac or All-Parts should have them. |
|
| |
|
Joined:
January 2003
Posts: 1498
Location: San Bernardino, California | The correct designation is M6n. All-Parts only has the 12-string version (smaller knobs.) |
|
| |
|
Joined:
December 2001
Posts: 7251
Location: The Great Pacific Northwest | Although the aftermarket places have them.. they do not have the Ovation logo or say Ovation on them like the originals that Al or myself have. |
|
| |
|
Joined:
November 2002
Posts: 1196
Location: Lafayette, Louisiana | Miles, did some Ovation acoustics have these tuners? I think I have seen them on some older Balladeers. |
|
| |
|
Joined:
February 2002
Posts: 5750
Location: Scotland | Balladeers (Custom Balladeer had chrome) Vipers (but not Viper 3's) Breadwinners & Matrix all had nylon-bodied M6's |
|
| |
|
Joined:
March 2002
Posts: 15686
Location: SoCal | Jon:
I was going to send you a pic this morning of my tuners, but the screw stubs are not at an angle. They are straight up and down on the tuner (but offset, one in and one out from the tuning key). I can still send a pic if you'd like, but it sounds like Miles or Al will have what you need. |
|
| |
|
Joined:
June 2003
Posts: 4
| I don't have a picture of what my tuners look like, but I did spot a similar one on Ebay that has the same mounting screw placement. I'm still interested in acquiring the tuners in either all chrome, all black, or with the black casing. Cheers!!!---Jon
Ebay |
|
| |
Ovation Breadwinner tuners
