|
|
Joined:
September 2007
Posts: 2
| Hi Volks!
This is my first post in this great forum with a question:
My old Ovation sadly needs a neck repair and maybe a new finsh on the headstock - so it could be that the "Ovation" logo will be lost.....
So my question:
Does a source exist where I can buy the old Ovation logo - decal????
Or does anyone now which font this is????
I would need this:
http://www.junkguitars.com/stories/gp3.jpg
Thanks a lot
bye SickBoy |
|
| |
|
Joined:
June 2006
Posts: 7307
Location: South of most, North of few | Get a hold of John or Kim at the factory. I'm sure they can help you out. You can find their email address on the Ovation website somewhere under warranty service. |
|
| |
|
Joined:
December 2001
Posts: 10582
Location: NJ | I don't think they will send you a logo if they did not refin the neck. |
|
| |
|
Joined:
August 2002
Posts: 8307
Location: Tennessee | You should have the factory repair your neck and refinish it, adding a new logo. They do great work at very fair prices.
P.S. Mike Ness fan? |
|
| |
|
Joined:
January 2005
Posts: 4903
Location: Phoenix AZ | The logo decal for the GP might be hard to come by. It's a standard font (Georgia) so you could easily make your own. Dave |
|
| |
|
Joined:
March 2005
Posts: 12758
Location: Boise, Idaho | If you're the guy with the $50 GP, I'd send it back to the factory and have them refinish the neck and do the logo. The investment would be worth it. |
|
| |
|
Joined:
March 2002
Posts: 14842
Location: NJ | The font is a derivative of CLARENDON (Georgia is a generic "computer" font).
A good sign shop should be able to cut it out of gold pressure-sensitive vinyl and you could apply it to the refinished headstock. I just wouldn't put any clear-coat over it, as it could "eat" the vinyl. You could also possibly have 'em make a stencil out of vinyl "computer mask" and spray it on in gold.
You could theoretically screen-print it on, but it'd take a bit of doing, and entail some costs ("Back in the Day", I could knock it off in an hour) . . . |
|
| |
|
Joined:
January 2005
Posts: 4903
Location: Phoenix AZ | Originally posted by cliff:
The font is a derivative of CLARENDON (Georgia is a generic "computer" font). Font Nazi |
|
| |
|
Joined:
March 2002
Posts: 14842
Location: NJ | Marketing Puke. |
|
| |
|
Joined:
February 2005
Posts: 11840
Location: closely held secret | Both of you, to principal Rooney's office... NOW! |
|
| |
|
Joined:
May 2003
Posts: 4389
Location: Capital District, NY, USA Minor Outlying Islands | Why will the logo be lost? |
|
| |
|
Joined:
June 2006
Posts: 7307
Location: South of most, North of few | Dave, you and Cliff need to sit on opposite ends of the room if you can't get along. :D |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | Get the hoses! Get the Hoses!!! |
|
| |
|
Joined:
December 2003
Posts: 13987
Location: Upper Left USA | don't forget to Spill check... |
|
| |
|
Joined:
September 2007
Posts: 2
| Hi!
Thanks for your all replies!!! I don't want to ship the guitar to Ovation for the repair - that's to circuitous. The repair will be done by my local luthier and he does great work.
When it's necessary to add a new logo I think I'll go with the font-option!
Georgia comes close but it isn't 100 % correct - and I don't have the Clarendon-font on my PC but I'm searching for it!
Thanks guys - bye
Sickboy |
|
| |
|
Joined:
March 2005
Posts: 5563
Location: Blue Ridge Mountains | Get the hoses! Get the Hoses!!!
NOOO, Not the hoses again; PLEASE!!!!!!!!!!!!! |
|
| |
Vintage Ovation Logos - Decals?????
