The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: "One good thing about music, when it hits you, you feel no pain." - Bob Marley



Jump to page : 1
Now viewing page 1 [25 messages per page]
Vintage Ovation Amplifier - Reverb Problem Solved

View previous thread :: View next thread
   Members Forums -> Ovation Electric GuitarsMessage format
 
iglupickin
Posted 2015-04-04 7:51 AM (#508380)
Subject: Vintage Ovation Amplifier - Reverb Problem Solved


Joined:
March 2004
Posts: 137

Location: Fitzwilliam, New Hampshire

Just an FYI. As I'm restoring an old K6100 powered speaker cab and K6002 preamp head the reverb didn't work. I could here a slight bit of reverb at max volume but not much. So a reliable source told me that it was common for those reverb tanks to have weak connections even when the soldered joints on the RCA input/output AND the little transformers at both ends of the spring carriage meter out fine for continuity. So, I touched them up last night with a solder pen and voila, its working just fine.

MARK in Boise: Didn't you have issues with yours? If so, you have to carefully remove the bottom cover of the tank which is only held on with double stick tape(at least on mine). Touch up those connections (8 in all) and retest!

Good luck and let me know if it works out.

Top of the page Bottom of the page
Mark in Boise
Posted 2015-06-25 2:13 PM (#512924 - in reply to #508380)
Subject: Re: Vintage Ovation Amplifier - Reverb Problem Solved


Joined:
March 2005
Posts: 12750

Location: Boise, Idaho
I don't remember seeing this post before. I'll have to remember to do this when I get around to fixing it up.
Does anyone who has one of these amps know if Ovation used carpet pads for insulation in them? That's what mine has and it's falling apart inside. I may pull it out and replace it with some fine grained foam. Any recommendations for that?
Top of the page Bottom of the page
iglupickin
Posted 2015-06-25 7:12 PM (#512934 - in reply to #508380)
Subject: Re: Vintage Ovation Amplifier - Reverb Problem Solved


Joined:
March 2004
Posts: 137

Location: Fitzwilliam, New Hampshire
Mark,
I would check Parts Express for material. They've go various types and may be more suited to yours not knowing what that carpet pad stuff is original.
https://www.parts-express.com/cat/cabinet-damping-material/311

Suggestion only,
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclubâ„¢ Copyright (c) 2001
free counters
(Delete all cookies set by this site)