The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: "Jazz... isn't that just a series of mistakes disguised as musical composition?” - David St. Hubbins of Spinal Tap



Jump to page : 1
Now viewing page 1 [25 messages per page]
Ovation Speakers - 9702 Audient

View previous thread :: View next thread
   Members Forums -> Ovation Electric GuitarsMessage format
 
iglupickin
Posted 2015-03-03 7:18 AM (#507200)
Subject: Ovation Speakers - 9702 Audient


Joined:
March 2004
Posts: 137

Location: Fitzwilliam, New Hampshire

As I searched for some original speakers for my K6100 restoration, I finally found one on E-Bay that was in great shape! It appears the 9702 12" Audient is not too common. Also, when I got the speaker I noticed a subtle difference in the center cone compared to the speakers that were in my cabinet when I got it. Not sure if it was a recone or just a design change by the manufacturer.

First, the (clean one) speaker I just bought: The silver center dust cover differs from my (assuming to be original) 9702 speaker in that there is a tapered funnel tube (with vent holes) that raises the silver dome slight above the surface of the paper cone. I've not seen one like this before and wondered if anyone else has seen this?

The second speaker (the dirty one) was in my K6100 when I bought it. Pretty nasty from all the mouse crap that it sat in for who knows how long.

Appreciate any feedback.





(IMG_1138.jpg)



(IMG_1139.jpg)



(IMG_1140.jpg)



(IMG_1141.jpg)



Attachments
----------------
Attachments IMG_1138.jpg (60KB - 0 downloads)
Attachments IMG_1139.jpg (53KB - 0 downloads)
Attachments IMG_1140.jpg (66KB - 0 downloads)
Attachments IMG_1141.jpg (57KB - 0 downloads)
Top of the page Bottom of the page
Mark in Boise
Posted 2015-03-03 12:19 PM (#507209 - in reply to #507200)
Subject: Re: Ovation Speakers - 9702 Audient


Joined:
March 2005
Posts: 12750

Location: Boise, Idaho
Mine is a 9725 and I can't figure out how to get the front grill off. Any hints?

Edited by Mark in Boise 2015-03-03 12:20 PM
Top of the page Bottom of the page
iglupickin
Posted 2015-03-03 4:47 PM (#507222 - in reply to #507200)
Subject: Re: Ovation Speakers - 9702 Audient


Joined:
March 2004
Posts: 137

Location: Fitzwilliam, New Hampshire
Mark,
Mine was attached with screws/nuts from the inside. Look behind the insulation around the edges for the nuts! It then pushed out the front. I replaced the tattered grille cloth on mine and it came out pretty easy.
Gary
Top of the page Bottom of the page
iglupickin
Posted 2015-03-03 4:49 PM (#507223 - in reply to #507200)
Subject: Re: Ovation Speakers - 9702 Audient


Joined:
March 2004
Posts: 137

Location: Fitzwilliam, New Hampshire
...and yes, the grille, speaker and soundboard will all come out at the same time. I assume that's what you meant?
Gary
Top of the page Bottom of the page
Mark in Boise
Posted 2015-03-04 10:54 PM (#507309 - in reply to #507200)
Subject: Re: Ovation Speakers - 9702 Audient


Joined:
March 2005
Posts: 12750

Location: Boise, Idaho
Yes, I figured it came off from the back, since I couldn't see anything from the front. I won't open it to look. I need to find some new insulation before I open it up again. The original stuff crumbles every time I touch it and makes a big mess. It would have made a good winter project, if we had any winter this year.
Top of the page Bottom of the page
iglupickin
Posted 2015-03-05 7:03 AM (#507320 - in reply to #507200)
Subject: Re: Ovation Speakers - 9702 Audient


Joined:
March 2004
Posts: 137

Location: Fitzwilliam, New Hampshire
My grille cloth had already been replaced and they must've used a whole box of staples on the last one. Took me some time to pull all of those out. The Fender grille cloth I had was a bit thicker than the original Ovation cloth so I ended up trimming the sound board on my table saw an extra 16th of an inch all around so it would fit back into the cabinet. It came out pretty nice but still need to find a horn driver and another 9702 speaker this to complete it. I'll post a pic once its all done!
Top of the page Bottom of the page
iglupickin
Posted 2015-03-21 8:10 AM (#507905 - in reply to #507200)
Subject: Re: Ovation Speakers - 9702 Audient


Joined:
March 2004
Posts: 137

Location: Fitzwilliam, New Hampshire
Found another 9702 speaker. Looks like a recone but I don't care. Now I just need a horn driver and some info on how the speakers, horn and crossover are wired! Was the power amp output 4, 8, or 16 ohm??? Most ID40 drivers I've seen are 16 ohm so that makes an interesting combo depending on how this all wires together! Any info on the output specs of the amp are needed. Don't want to mismatch and blow it up!
Top of the page Bottom of the page
Mark in Boise
Posted 2015-03-22 12:00 AM (#507921 - in reply to #507200)
Subject: Re: Ovation Speakers - 9702 Audient


Joined:
March 2005
Posts: 12750

Location: Boise, Idaho
Do any of the pictures in my gallery help? Mine has some wiring issues, too. It looks like someone did a hack job with a soldering iron.
Top of the page Bottom of the page
iglupickin
Posted 2015-03-22 7:07 AM (#507924 - in reply to #507200)
Subject: Re: Ovation Speakers - 9702 Audient


Joined:
March 2004
Posts: 137

Location: Fitzwilliam, New Hampshire
I did look but not enough info to confirm the amp output specs! My best guess is that the output of the amp "should" be a nominal 8 ohms. With a 16 ohm horn driver in parallel to (2) 8 ohm speakers wired in series (equals 16 ohms), the sum of all is 8 ohms!! So, I'm going to give that a go as soon as I get a driver. I think I have a lead on a horn driver for a lot less money that those I've seen on E-Bay for crazy money!!! I need to verify the crossover is correct but I'm getting closer!
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclub™ Copyright (c) 2001
free counters
(Delete all cookies set by this site)