The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: "I've always felt that blues, rock 'n' roll and country are just about a beat apart."-Waylon Jennings



Jump to page : 1
Now viewing page 1 [25 messages per page]
Lighter strings = Less tension = Truss Rod Adj ..???

View previous thread :: View next thread
   Forums Archive -> The Vault: 2006Message format
 
Yak
Posted 2006-12-14 11:02 AM (#226640)
Subject: Lighter strings = Less tension = Truss Rod Adj ..???


Joined:
September 2006
Posts: 347

Location: Reno, NV
Just wondering if going between different string gauges is going to require a truss rod adjustment? From Light (12) to Custom Light (11).
Top of the page Bottom of the page
Joyful Noise
Posted 2006-12-14 11:15 AM (#226641 - in reply to #226640)
Subject: Re: Lighter strings = Less tension = Truss Rod Adj ..???


Joined:
March 2004
Posts: 629

Location: Houston, Texas
In all probability, it won't. But it is possible that it might need a tweak. That's not a big leap. Probably depends on how low your action is currently set.
Top of the page Bottom of the page
an4340
Posted 2006-12-14 12:06 PM (#226642 - in reply to #226640)
Subject: Re: Lighter strings = Less tension = Truss Rod Adj ..???


Joined:
May 2003
Posts: 4389

Location: Capital District, NY, USA Minor Outlying Islands
Depends how fussy you are. Sometimes it makes a difference, other times not. Just go for it ..
Top of the page Bottom of the page
mtnbikerfred
Posted 2006-12-14 12:21 PM (#226643 - in reply to #226640)
Subject: Re: Lighter strings = Less tension = Truss Rod Adj ..???


Joined:
March 2005
Posts: 1421

Location: Orange County, California
*if* you like the factory setup (decidedly middle-of-the road), you probably won't notice much difference going from lights to custom lights, or even to some of the heavier tensions. These necks are just really stable. Now, If you've taken out 3 shims, and/or like you neck "straight as an arrow" (no relief what so ever), then you might get some buzz in the middle frets going to really light strings. just give the ol' t-rod a twist (loosen to add relief) and bob's yer uncle. Conversely, if you're a fret crusher (like Moody, who only knows three chords including EbMaj, which he plays in the first position) who simply gives us all "LARGER STRING ENVY", you might want to put in a shim and/or flatten out the neck with the truss rod.

The Mother ship sets them up a little high, with a measurable amount of relief on 12-53's. All in all, a good place to start.

Just like soup, season to taste.
Top of the page Bottom of the page
brainslag
Posted 2006-12-14 12:24 PM (#226644 - in reply to #226640)
Subject: Re: Lighter strings = Less tension = Truss Rod Adj ..???


Joined:
April 2006
Posts: 1138

Location: CT
I haven't gotten to Em yet. :(
Top of the page Bottom of the page
ignimbyte
Posted 2006-12-14 10:00 PM (#226645 - in reply to #226640)
Subject: Re: Lighter strings = Less tension = Truss Rod Adj ..???


Joined:
July 2004
Posts: 812

Location: Hicksville, NY
I did the opposite ... I upgraded from custom lights to lights for all my guitars. The truss rod needed some tweaking, but it wasn't major. I will admit that the custom lights were a little gentler on the fingers, but they also sound weak and can be annoyingly bright at times.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclubâ„¢ Copyright (c) 2001
free counters
(Delete all cookies set by this site)