|
|
Joined:
June 2006
Posts: 7307
Location: South of most, North of few | To join the rest of the stupid questions I've asked, is there a need to lube tuners now and then? I beleive I have Schaller's (sp) on both my 1614 and the 1681 Adamas. (correct me if I'm wrong) And if so, what do you use? |
|
| |
|
Joined:
August 2006
Posts: 2804
Location: ranson,wva | ive never lubed any of my machines but i dont see why you cant pull the worm out and hit it with a little graphite or light machine oil...jason |
|
| |
|
Joined:
June 2006
Posts: 7307
Location: South of most, North of few | I didn't know if they were "life lubricated" which means they die when they run out of lubrication. |
|
| |
|
Joined:
May 2003
Posts: 4389
Location: Capital District, NY, USA Minor Outlying Islands | The answer to your first question is: No |
|
| |
|
Joined:
January 2002
Posts: 14127
Location: 6 String Ranch | Wait till you hear the valves knocking, then add a quart. |
|
| |
|
Joined:
September 2006
Posts: 10777
Location: Keepin' It Weird in Portland, OR | Just to state the obvious; if they are working fine, fine!
If they are sticking or dragging, a drop of oil shouldn't hurt, if applied carefully. If that don't work, rebuilt/replace. |
|
| |
|
Joined:
April 2006
Posts: 1138
Location: CT | Arent your Schallers 'sealed' tuners? The only tuners you should need to oil are the old Klusons with the hole in them(put there for oiling), or opened back ones, or the ones that aren't sealed - they just have a cover over the gear. |
|
| |
|
Joined:
September 2003
Posts: 815
Location: Colorado | I would compare these sealed tuners to the CV (constant velocity) joints on car axle shafts. As long as the rubber boot is intact and not torn (keeping the bearings greased), the bearings will last forever (theoretically).
So as long as the seal on the tuner is intact, you shouldn't need to touch it. |
|
| |
OK, now for the next stupid question....
