|
|
Joined:
September 2006
Posts: 54
Location: Taiwan | New Balladeer 1771-LX - Suddenly the wires are banging around inside. I can see a small circular clip that a few wires are running through. It obviously un-attached itself.
Where from? Is it normally glued to the bowl? Top? Or maybe clipped, not glued, to one of the braces or something?
Or something else?
Thanks is advance. |
|
| |
|
Joined:
May 2002
Posts: 651
Location: Australia | If yours is the same as mine, it has a little round snap shut self adhesive clip.
Mine came loose and I tried to stick it back and eventually gave up.
In the end I bunched the wires together and cable tied'em. No more rattle. |
|
| |
|
Joined:
September 2006
Posts: 54
Location: Taiwan | Thanks Richard -
I have tons of those in various widths. What did you cable tie them to? |
|
| |
|
Joined:
May 2002
Posts: 651
Location: Australia | I bunched them together and tied them tight enough that they wouldn't slap against the bowl and left them floating.
Worked great.
Good luck. |
|
| |
|
Joined:
September 2006
Posts: 54
Location: Taiwan | Worked great.
And now I've mastered the fine art of fastening a cable tie with one hand.
Thanks! |
|
| |
|
Joined:
September 2006
Posts: 10777
Location: Keepin' It Weird in Portland, OR | Good skill for a Luthier, electrician, or auto mechanic. |
|
| |
Balladeer Wires Clip Where?
