Posted 2021-10-07 3:04 PM (#556211) Subject: ADJUST TRUSS ROD ON OVATION CS257
Joined: August 2005 Posts: 616
Location: cincinnati, ohio
In have early stage Parkinson's disease. Fortunately it hasn't affected my playing that much, but I have trouble using tools. I've adjusted O's with a TR cover on the headstock, and gone in through a regulation sound hole. But I've never adjusted a guitar with epaulets and a double truss rod, and that "manhole cover" on the bowl looks intimidating.
Posted 2021-10-08 12:31 AM (#556214 - in reply to #556213) Subject: Re: ADJUST TRUSS ROD ON OVATION CS257
Joined: June 2012 Posts: 2316
Location: Pueblo West, CO
While I've never had occasion to work on one, the LX series used a double TR.
Simply put, the double TR allows you to push or pull the neck to adjust the relief. A single TR only pulls the neck.
The manhole cover is just a machine screw that connects to a four-fingered sheet metal 'clamp'. Loosening the screw will allow you to slip the manhole cover off to the side.
Here's a video our Old Man Arthur did that demonstrates how to remove it and reinstall it.
ADJUST TRUSS ROD ON OVATION CS257
