The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: "Ovation Guitars really don't get the respect they deserve!" - Alex Pepiak



Jump to page : 1
Now viewing page 1 [25 messages per page]
LX trussrod adjustment?

View previous thread :: View next thread
   Members Forums -> General PostingMessage format
 
d'ovation
Posted 2021-09-28 1:18 PM (#556175)
Subject: LX trussrod adjustment?


Joined:
December 2003
Posts: 848

Location: Canada

My 6756LX 12 string has started to have a noticeable buzz on high strings at frets 2 and 3 which is getting annoying for D chords etc. I assume that this calls for a relief adjustment via trussrod. I haven't done this for decades and never with an LX, so am looking for advice. I assume that this is needs removal of the cover on the headstock? Do I need to slacken the strings or do adjustment with guitar under tension? Do I turn the key toward the high or low strings to remove buzz on the high strings? 

Top of the page Bottom of the page
nerdydave
Posted 2021-09-29 12:11 AM (#556179 - in reply to #556175)
Subject: Re: LX trussrod adjustment?


Joined:
August 2011
Posts: 887

Location: Always beautiful canyon country of Utah
Just google adjust truss rod ovation and there are numerous articles
Top of the page Bottom of the page
arumako
Posted 2021-09-29 12:43 AM (#556180 - in reply to #556175)
Subject: Re: LX trussrod adjustment?



Joined:
October 2012
Posts: 1034

Location: Yokohama, Japan
Hi d'ovation!
Yeah, it should be a truss-rod cover removal and a 3/16" allen wrench. If you turn the truss-rod toward the 1st (high e) string, it will loosen the rod and give you more relief (bowing the neck). Turn it to the 6th (low E) string and it will tighten the rod and remove the relief (straighten the neck). Shouldn't take more than a quarter or half turn to see if neck relief is the issue. If it has been sometime since your last tune-up, your frets might need to be dressed a bit too. Hope this helps! Good luck!
Top of the page Bottom of the page
tpa
Posted 2021-09-29 1:34 AM (#556181 - in reply to #556175)
Subject: Re: LX trussrod adjustment?


Joined:
December 2004
Posts: 566

Location: Denmark
I would start by judging how much relief is already there before adjusting. put a capo on at 1st position and depress a string at 13th fret. then judge or measure the gap between string and 5th fret. Check both E and e strings this way. There should be a gap and it should be (my preference) 0.2-0.4 mm depending on string gauge playing style etc etc. Also sight down along the neck to see if it warps or twists and, as Arumako proposes, look for worn/dented/high/loose frets in the cowboy zone. Then decide what to do.

Edited by tpa 2021-09-29 1:38 AM
Top of the page Bottom of the page
tpa
Posted 2021-09-29 1:34 AM (#556182 - in reply to #556175)
Subject: Re: LX trussrod adjustment?


Joined:
December 2004
Posts: 566

Location: Denmark
(double post - sorry)

Edited by tpa 2021-09-29 1:36 AM
Top of the page Bottom of the page
nerdydave
Posted 2021-09-30 11:23 PM (#556190 - in reply to #556175)
Subject: Re: LX trussrod adjustment?


Joined:
August 2011
Posts: 887

Location: Always beautiful canyon country of Utah
There you have it!!



Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclubâ„¢ Copyright (c) 2001
free counters
(Delete all cookies set by this site)