The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )

Random quote: "Believe me when I say that some of the most amazing music in history was made on equipment that's not as good as what you own right now." - Jol Dantzig



Jump to page : 1
Now viewing page 1 [25 messages per page]
Adamas Mill-CB

View previous thread :: View next thread
   The Ovation Fan Club -> Welcome CenterMessage format
 
AAGF
Posted 2010-07-06 4:29 PM (#3169)
Subject: Adamas Mill-CB


Joined:
July 2010
Posts: 13

Location: Largo, Florida		Hi,

I have an Adamas Mill-CB, owned from new, but the epaulets are lifting at the edges. Is there an approved way of getting these fixed? Back to Kamen?

Any information would be appreciated.

Thanks
Top of the page Bottom of the page
stonebobbo
Posted 2010-07-06 8:19 PM (#3170 - in reply to #3169)
Subject: Re: Adamas Mill-CB



Joined:
August 2002
Posts: 8307

Location: Tennessee		Loctite was the solution that I used on the one that lifted off my 2000C. I was told they use it at the factory. But things may have changed. You can send it back to Ovation in CT too for a job done right. If you can post some pics, that might help folks here evaluate the situation a little better.
Top of the page Bottom of the page
AAGF
Posted 2010-07-25 5:30 PM (#3171 - in reply to #3169)
Subject: Re: Adamas Mill-CB


Joined:
July 2010
Posts: 13

Location: Largo, Florida		Thanks for the suggestion stonebobbo. I just sent the guitar to Ovation to get a quote for the fix, but it looks like they are shut down until 8/02 according to Kim Keller's email bot response. I will update when I know more.
Top of the page Bottom of the page
AAGF
Posted 2010-09-01 6:45 PM (#3172 - in reply to #3169)
Subject: Re: Adamas Mill-CB


Joined:
July 2010
Posts: 13

Location: Largo, Florida		Update: my Mill-CB was sent to Ovation and returned in about three weeks looking like new. Only cost was the shipping.

My thanks to Kim Keller and the tech who did the work - looks like new epaulets, along with new strings and even a fresh battery.

Excellent service all round by Ovation!

P.S. Full forum access requested.
Top of the page Bottom of the page
Old Man Arthur
Posted 2010-09-01 9:57 PM (#3173 - in reply to #3169)
Subject: Re: Adamas Mill-CB



Joined:
September 2006
Posts: 10777

Location: Keepin' It Weird in Portland, OR		That is so cool.

Now you gotta post pictures.

Please!
Top of the page Bottom of the page
BT717
Posted 2010-09-04 6:37 PM (#3174 - in reply to #3169)
Subject: Re: Adamas Mill-CB


Joined:
October 2007
Posts: 2711

Location: Vernon CT
Originally posted by Old Man Arthur:
[QB] That is so cool.


THAT is so Ovation!
Top of the page Bottom of the page
AAGF
Posted 2010-09-05 5:26 PM (#3175 - in reply to #3169)
Subject: Re: Adamas Mill-CB


Joined:
July 2010
Posts: 13

Location: Largo, Florida
Originally posted by Old Man Arthur:
That is so cool.

Now you gotta post pictures.

Please!
I tried! I put a few (crap) ones on the Ning site, but I'll try to take some better ones when the sun comes out again.
Top of the page Bottom of the page
AAGF
Posted 2010-11-16 7:54 PM (#3176 - in reply to #3169)
Subject: Re: Adamas Mill-CB


Joined:
July 2010
Posts: 13

Location: Largo, Florida		http://ovationfanclub.ning.com/photo/pictures-059?xg_source=activit...

Link to a closeup of the replaced epaulets ...
Top of the page Bottom of the page
standing
Posted 2010-11-16 8:18 PM (#3177 - in reply to #3169)
Subject: Re: Adamas Mill-CB



Joined:
December 2008
Posts: 1453

Location: Texas

Beautiful.
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclub™ Copyright (c) 2001
free counters
(Delete all cookies set by this site)