|
|
Joined:
July 2004
Posts: 147
Location: liverpool ,england | still looking to buy a sunburst folklore in decent condition and willing to ship to england your price paid within reason many thanks |
|
| |
|
Joined:
November 2002
Posts: 3667
Location: Pacific Northwest Inland Empire | Hate to interrupt, but were they made in the "-1" finish? |
|
| |
|
Joined:
July 2004
Posts: 147
Location: liverpool ,england | no you could get them in either natural or tabbaco sunburst |
|
| |
|
Joined:
August 2006
Posts: 2804
Location: ranson,wva | #1 & #4 both of my folklores are #4...jason |
|
| |
|
Joined:
January 2005
Posts: 4903
Location: Phoenix AZ | You don't see sunburst ones very often. Maybe 200:1 natural to sunburst. If it were me I'd buy a natural one with lacquer cracks cheap and pay to have it refinished in sunburst. It'll probably cost you the same total as a sunburst one and save you 3 years time. Dave |
|
| |
|
Joined:
June 2006
Posts: 7307
Location: South of most, North of few | Originally posted by johnnycash83:
#1 & #4 both of my folklores are #4...jason You have exceeded the maximum number of folklores allowed to one person/household. Please mail the best one to our firm, and we can avoid litigation.
Thank you,
Duwee, Sueim, and Howe. |
|
| |
|
Joined:
August 2006
Posts: 2804
Location: ranson,wva | the "lesser" one is gonna be repaired by me and given to my dad for xmas...jason |
|
| |
|
Joined:
August 2006
Posts: 3145
Location: Marlton, NJ | Jim - I'm wearing one of your lawfirms shirts as we speak..
It says Dewey, Cheetham and Howe.
Given to me by a salesman (of course) that I used to work with. |
|
| |
|
Joined:
June 2006
Posts: 7307
Location: South of most, North of few | Ah yes, Mr. Cheetham left the firm to become an assioiate at Go, Slip, and Fall last July.
(getting waaaay OT here) |
|
| |
|
Joined:
July 2004
Posts: 147
Location: liverpool ,england | thanks for the advice dave will go down that route i think. i already own a 1114 folklore in natural but has a couple of bad cracks in the lower bout how do you think i could go about getting this re finished or the whole top replaced, do you have to ship back to ovation to do this or would a lutier nearer my shores would be better suited and cost effective. cheers gary. |
|
| |
|
Joined:
March 2005
Posts: 12762
Location: Boise, Idaho | You might do a search on this board for factory repairs. I think Mitchrx and Seesquare have had cracked tops repaired by the factory. If the cracks are into the wood, they will probably show up slightly through the new finish. They also do the best sunbursts, so as Dave suggested, if you really want a sunburst finish, send the 1114 that you have in and have it fixed and refinished in sunburst. The sunburst may disguise the repaired cracks better than a natural finish. |
|
| |
wanted 1614 folklore
