Joined: March 2006 Posts: 1634
Location: Chehalis, Washington | This was posted up a few weeks ago, and due to more GAS and its typical pains, here it is again with reduced price!
I just recently got this back from CT with brand new frets & a general refresh. Here's some pics & info:
* 1998 CE778-CCB Custom Elite (PRE-FENDER)
* Deep bowl w/cutaway
* AAA Spruce top
* Cherry burst finish
* 1 11/16" nut, 5-piece neck
* Abalone body, rosette, fretboard inlays
* Ebony fingerboard, bridge
* Multi-piece wood epaulets
* Optima preamp w/tuner, XLR & 1/4" outputs
* Original Ovation hardshell case
As I mentioned, this just came back from a trip to the factory. It had a couple minor issues, the biggest of which was a slight separation between the bowl and body binding on one edge, which has been reglued and sprayed so that I can't even tell where it was. No issue now.
Electronics were checked out, and frets dressed & leveled.
Cosmetically this only has one issue, and that is a small finish check running about 1.5" along the lower right bout of the guitar. The techs at Ovation glued & polished it so that there should be no spreading or further issue, but up close you can see it. It doesn't photograph well, but I highlighted it as well as I could in one of the pics.
This of course has the Optima preamp with the 1/4" and XLR outputs, which in my opinion is still by far the BEST preamp system ever put into an acoustic guitar. Built-in tuner, notch, and 3-channel EQ. The sound through the balanced XLR output is amazing!
Asking $850 shipped in the lower 48, international available as well. Note - this is one of the pre-LX Ovations, as well as long before the Fender buyout and MADE IN THE USA!!!
PM or email me with questions.
 |