|
|
Joined:
December 2006
Posts: 6268
Location: Florida Central Gulf Coast | Anyone?
TIA!
Mike (MM),
I hope ya don't mind my 'borrowing' a partial pic. |
|
| |
|
Joined:
August 2006
Posts: 3145
Location: Marlton, NJ | Iffy - If it's the same as a six, I've got a plastic cover. Which screws? |
|
| |
|
Joined:
June 2007
Posts: 3084
Location: Brisbane Australia | It's not screwed on if that's what you think.
Originally there were plastic tangs that went through the mounting holes in the bridge and were then melted over.
Not a major problem.
I've replaced a couple of badly faded covers and used a small amount of silicone adhesive.
AJ |
|
| |
|
Joined:
December 2006
Posts: 6268
Location: Florida Central Gulf Coast | Mike,
I have no idea if the 6er is the same width as a 12.
AJ,
I just assumed these were screws.  |
|
| |
|
Joined:
March 2005
Posts: 5567
Location: Blue Ridge Mountains | Iffy, no problem: you're welcome anytime...nice to have the guitar to take pictures of...I had thought of replacing the plastic w/chrome Schaler/Ovation bridge...still thinking about it...not sure it they were offered with that bridge or not...I think they were but mine is an early one...so perhaps I'll leave it as is...decesions, decesions....
I believe it is the same width...just different spacing on the saddles...
The screws allow for intonation adjustment and the one on the back is for height adjustment...(I think I'm right)
BTW, did yours get here yet? if so: Pic's/report?
lol... |
|
| |
|
Joined:
August 2006
Posts: 3145
Location: Marlton, NJ | Iffy - I'll check. I think they're the same. You don't need the whole bridge, correct? Just the plastic cover? |
|
| |
|
Joined:
December 2006
Posts: 6268
Location: Florida Central Gulf Coast | Originally posted by MusicMishka:
BTW, did yours get here yet? if so: Pic's/report? Mike (MM),
Yes, I received it yesterday. What a beaut! Other than the missing cover and one very small ding, it's near mint.
Pics will have to wait until I can drop one of these crutches. Not quite there yet; although I did get to drive yesterday and to church this AM! YEAH...
BTW, the flight/travel case must have a story of it's own. I'll have to take pics of it also.
Mike (CL),
I just need a cover. If we can verify the width, then I'd be more than glad to work something out with ya.
Thanx! |
|
| |
|
Joined:
August 2006
Posts: 3145
Location: Marlton, NJ | If it fits, it's yours Iffy. |
|
| |
|
Joined:
December 2006
Posts: 6268
Location: Florida Central Gulf Coast | Hey Mike and Mike! Could ya'll please take some hole C/L-to-hole C/L measurements?
Sure would appreciate it...  |
|
| |
|
Joined:
December 2003
Posts: 13996
Location: Upper Left USA | The posts on the 6 and 12 are the same distance but different hardware from the one piece to the Brass and Black Plastic. |
|
| |
|
Joined:
August 2006
Posts: 3145
Location: Marlton, NJ | I didn't realize until looking at the various bridges that the plastic piece was the same for the 6 string (adjustable bridge pieces) and the 12 string (non-adjustable bridge pieces).
Iffy - it'll go out tomorrow. I'll be out on the road today. |
|
| |
|
Joined:
March 2005
Posts: 5567
Location: Blue Ridge Mountains | Iffy, the black plastic cover is the same for both: the actual bridge for the 12 is different from the 6 because the saddles have differing compensation for the 12 strings... |
|
| |
|
Joined:
August 2006
Posts: 3145
Location: Marlton, NJ | The 12 has fixed compensation while the 6 is adjustable. There are 12 holes in the plastic piece. For the 6 string, 6 of the holes are for strings while the other 6 are for the adjusting screws. On the 12, all 12 holes are for the strings since there are no adjusting screws. |
|
| |
|
Joined:
December 2006
Posts: 6268
Location: Florida Central Gulf Coast | Thanx gents! 
Mike & Mike, check your PMs. |
|
| |
|
Joined:
October 2007
Posts: 2711
Location: Vernon CT | This is why I love this group. Allways willing to help out a member in need!! :) |
|
| |
Help! Looking for Deacon 12 Cover/Screws...
