The Ovation Fan Club
The Ovation Fan Club
Forum Search | Statistics | User Listing Forums | Calendars | Albums | Language
Your are viewing as a Guest. ( logon | register )
NEW in 2026 Searches both the Ovation FanClub and Ovation Tribute websites

Random quote: "It's much too late to do anything about rock & roll now ..." - Jerry Garcia / Grateful Dead



Jump to page : 1
Now viewing page 1 [25 messages per page]
WTB tuner for 1st edition BREADWINNER

View previous thread :: View next thread
   The Ovation Fan Club -> For SaleMessage format
 
PNR123
Posted 2008-11-16 2:07 AM (#298042)
Subject: WTB tuner for 1st edition BREADWINNER


Joined:
October 2008
Posts: 7

Location: Calgary, Alberta, Canada		I'm looking to buy a replacement treble side tuner for an early Breadwinner after mine fell over , this is the tuner where the screws are opposite each other instead of offset to each other like the photos (hopefully it works), thanks in advance for any help




.

.

.

.

.


this is the tuner that I am looking for, the screws are directly opposite from esch other

.
.
.
.
.
.
.
.


this photo is of the tuner that I do not require, the screws are NOT directly opposite each other but "offset", however one of these may work without the need for drilling any new holes, I would be interested in one of these as well

Top of the page Bottom of the page
Paul Templeman
Posted 2008-11-16 8:34 AM (#298043 - in reply to #298042)
Subject: Re: WTB tuner for 1st edition BREADWINNER


Joined:
February 2002
Posts: 5750

Location: Scotland		They're Schaller M6N, the "N" stands for nylon housing. They're still in production but they changed to offset screwholes a long time ago. You might find a vintage Ovation-logo'd set on ebay if your lucky.
Top of the page Bottom of the page
MWoody
Posted 2008-11-16 12:47 PM (#298044 - in reply to #298042)
Subject: Re: WTB tuner for 1st edition BREADWINNER



Joined:
December 2003
Posts: 13996

Location: Upper Left USA		Paul (PNR123) contacted me and I saw that his BW is an early issue.

I can send you one of the offsets if you need it but I'm hoping someone has the right one!
Top of the page Bottom of the page
Mr. Ovation
Posted 2008-11-16 12:59 PM (#298045 - in reply to #298042)
Subject: Re: WTB tuner for 1st edition BREADWINNER


Joined:
December 2001
Posts: 7247

Location: The Great Pacific Northwest		edit:

These are extremely rare, but I do in fact have some. Please email me at mileskb at aol.com

FWIW, I believe these were used on only the very first run of Breadwinners.

Miles
Top of the page Bottom of the page
TJR
Posted 2008-11-22 10:44 PM (#298046 - in reply to #298042)
Subject: Re: WTB tuner for 1st edition BREADWINNER



Joined:
July 2002
Posts: 288

Location: Maine		PNR123 ... Sounds like you found a replacment through MR O.
I discovered today I have an incomplete "spare" set of that style tuner-peg body as well . Talbot
Top of the page Bottom of the page
AussieJames
Posted 2008-11-23 6:20 AM (#298047 - in reply to #298042)
Subject: Re: WTB tuner for 1st edition BREADWINNER



Joined:
June 2007
Posts: 3084

Location: Brisbane Australia		Hey Talbot,

You amaze me!!

Don't have an early B/W/Deacon output jackplate do you?
Through the body not pg.

AJ
Top of the page Bottom of the page
TJR
Posted 2008-11-23 10:37 AM (#298048 - in reply to #298042)
Subject: Re: WTB tuner for 1st edition BREADWINNER



Joined:
July 2002
Posts: 288

Location: Maine		Since I don't have that model guitar ,I need to see a picture to know.. All I recall is the body had a large hole in the lower cutout area, but what did it all connect to?
Top of the page Bottom of the page
Jump to page : 1
Now viewing page 1 [25 messages per page]
Jump to forum :
Search this forum
Printer friendly version
E-mail a link to this thread

This message board and website is not sponsored or affiliated with Ovation® Guitars in any way.
Registered to: The Ovation Fanclub™ Copyright (c) 2001
free counters
(Delete all cookies set by this site)