|
|
Joined:
March 2005
Posts: 4
Location: Norway | Hi!
my first post here, nice place :cool:
I have an old Ovation preacher, but I have a hard time finding a trossrod key for it...
Do any of you know wich size I`m looking for, and where I can purchase one?
I tried to email ovation but, no answer...
regards from Norway :) |
|
| |
|
Joined:
June 2007
Posts: 3084
Location: Brisbane Australia | Welcome....you've been around a while by your member number.....
The truss rod is a 1/4" hex nut........tool required is a thin wall 1/4" tube spanner or 1/4" drive socket.....with a short extension.
A 6mm one might work........might be a bit neat.....I'll have to check for you as I have both.
Imperial sized tools might not be that easy to get in Europe.....
Let me know if you want me to try a 6mm socket.
AJ |
|
| |
|
Joined:
March 2005
Posts: 4
Location: Norway | thanks for such a fast reply!
could you try a 6mm socket for me?
thank you very much...
by the way, are you happy with your preacher?
I`m kind of strugling to set it up just right,.. |
|
| |
Ovation preacher trussrod key?
