|
|
Joined: April 2005 Posts: 2
Location: Florida, USA | Any advice on how to get the action lower? The Bridge doesn't leave enough room to lower the saddle without it sitting on the bridge itself.
Thanks |
|
|
|
Joined: June 2012 Posts: 2316
Location: Pueblo West, CO | Sounds like it's time for a neck reset. |
|
|
|
Joined: December 2003 Posts: 13987
Location: Upper Left USA | That has a bolt on neck, or the LX pocket if I remember. |
|
|
|
Joined: October 2005 Posts: 4044
Location: Utah | Presumably you've adjusted the truss rod properly and the nut height is ok. Correct? |
|
|
|
Joined: August 2002 Posts: 598
Location: Ottawa, Ontario, CANADA | Hi, Everyone,
Is there a shim under the saddle? Your owner's manual may mention this. I usually have my guitar tech remove it. This lowers the action about 1/16th". It could save a whole new neck re-set.
Mike S.
Ottawa, On. CANADA. |
|
|
|
Joined: October 2005 Posts: 4044
Location: Utah | '05 guitar shouldn't need a neck reset. Can you post pictures? Action at the nut, 6th fret, 12th fret, and the saddle.
It should be a bolt on neck. Perhaps a bolt is loose. |
|
|